Tag Archives: air compressor china

China high quality Manufacturers Direct Schneider Save Energy Screw Air Compressor air compressor for sale

Product Description

COMPANY PROFILE

KY-200KYG Air Compressor (can be customized) :

GENERAL FEATURES:
Permanent magnet inverter compressor because of its energy saving and high efficiency has become a hot and bright spot of the industry, the original air compressor energy consumption on the market, is gradually being the permanent magnet inverter compressor to replace or replacement, users can directly bring cost saveing of 20%-40%.
With the development of science and technology, air compressor is widely used in many industries such as machinery, metallurgy, building materials, electric power, chemical industry, food, textile and so on. However, the air compressor belongs to the high energy consumption equipment, power consumption in some industries accounted for more than 30% og the power consumption of production, it is commonly known as “electric tiger”.
SPECIAL FEATURES:
1,AIR PRESSURE STABILLTY
Due to the use of screw air compressor variable frequency stepless speed regulation characteristics of inverter, inverter controller or regulator through internal PID, can smoothly start; on consumption volatility is relatively large occasions, and can quicklyh adjust the response. Compared with the upper and lower limit switch control of the power frequency operation, the air pressure stability increases exponentially.
2,START NO IMPACT
Because the transducer itself contained the function of soft starter, starting current within the maximum rated current of 1.2 times, compared with the start frequency in general more than 6 times the rated current, start a little impact.
This impact is not only on the grid, the impact of the entire mechanical system, but also greatly reduced.
3,VARIABLE FLOW CONTROL
Power driven air compressor can only work in an exhaust, inverter air compressor can work in a wide range of exhaust. Frequency converter is based on the actual use of gas in real time to adjust the motor speed to control the amount of exhaust.
When the air volume is low, the air compressor can be automatically dormant. thereby greatly redcing the energy loss. The optimized control strategy can further improve the energy saving effect.
4,AC POWER SUPPLY VOLTAGE BETTER
Because of the over modulation technology of the inverter, the output voltage of the motor can be output when the voltage of the AC power supply is low, and the voltage of the output to the motor is too high.
For the generation of power, frequeucy conversion drive can show its advantages.
5,AC POWER SUPPLY VOLTAGE BETTER
Most of the working condition of the frequency conersion system is lower than the rated speed of the work, the host machine noise and wear down, prolongmain- tenance and service life.
If the fan is also driven by frequency conversion, can significantly reduce the nosie of air compressor work.

TECHNICAL PARAMETERS:

Model	Power	Pressure (Mpa)	Air flow	Noise	Stage	Exit pipe diameter	Weight (KG)	Dimensions (mm(LxWxH)
PE-10AVF	7.5	8	1.0	60±2	Single grade	3/4	280	1000600100
		10	0.8
PE-20AVF		8	2.2	60±2	Single grade	1	480	11508001280
		10	1.8
PE-30AVF	22	8	3.8	62±2	Single grade	11/4	520	11508001280
		10	3.0
PE-40AVF	30	8	5.0	63±2	Single grade	11/4	550	11508001280
		10	4.4
PE-50AVF	37	8	6.8	63±2	Single grade	11/2	650	130010001450
		10	5.4
PE-60AVF	45	8	8.0	65±2	Single grade	11/2	750	130010001450
		10	6.8
PE-75AVF		8	9.7	65±2	Single grade	2	1200	170012701500
		10	8.6
PE-100AVF	75	8	13.2	65±2	Single grade	2	1350	170012701500
		10	16.1

ENERGY-SAVING EFFECT OF TWO-STAGE COMPRESSION:

According to the engineering thermodynamics theory, it is the most economical for the compressor with isothermal compres-
sion.Two-stage oil-injection screw air compressor is designed based on the above theory, it fully improves the cooling function through oil injection during the two-stage compression, plus the inter-stage cooling, by ensuring the temperature is above the pressure dew point, it can be close to isothermal compression as possible, so as to achieve the energy-saving effect.
At the same time, due to low compression ratio of the two-stage airend, the “internal leakage”is largely reduced in the compression process compared with the single-stage compression airend with the same power and same discharge pressure.On the contrary, the diplacement is increased, which means that the efficiency is increased, and the specific power is reduced.
Compared with the ordinary two-stage permanent magnetic compressor on the market,Moair uses the two-drive and two-stage compres- sion, which directly avoids the power loss inside the gear set.
Energy-saving advantages:
1,To reduce the bearing load, and improve the volumetric efficincy;
2,In the case of partial load operation, it can improve efficiency and become energy saving to a better extent.
3,The energy saving of two-stage screw air compressor is up to 15%-25% than that of the one-stage air compressor, which can save the considerable electricity fees every year.

About shipping

Why choose us?

FAQ:

1.Q:What do you need machine and quotation?

A: According to capacity and factory size ,we can give you details.

2.Q: Are you trading company or manufacturer ?

A:We are factory.

3.Q:How do we pack machine?

A:Exporting wooden cases

4.Q:Lead time

A:Around 25-30 days after the receipt of your deposit.

Type:	High Pressure Gun
Usage:	Paint Spray Gun, Washing Gun, Hopper Gun, Garden Gun
Working Style:	Rotary Type
Air Wrench Type:	Pulse pneumatic wrench
Pneumatic Drill Range:	Tunnel
Degree of Automation:	Automatic

Customization:	Available \|

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

Air Pressure:

The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

Air Volume:

In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

Duty Cycle:

The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

Size and Portability:

It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China high quality Manufacturers Direct Schneider Save Energy Screw Air Compressor air compressor for sale
editor by CX 2023-10-23

China Custom Turbo Air Compressor Air Diffuser for CHINAMFG Aeration Systems small air compressor

Product Description

Turbo Air Compressor Air Diffuser For CHINAMFG Aeration Systems

Model	Stage/Phase	Frequency	Power	Voltage	Current	Airflow	Vacuum	Pressure	Noise	weight
Model	Stage/Phase	Hz	KW	V	A	m3/h	mbar	mbar	db	KG
LD 004 H21 R12	Single/Single	50	0.37	230	2.7	80	-110	110	53	11
LD 004 H21 R12	Single/Single	60	0.45	230	3.0	96	-130	140	53	11

Application:

Agriculture(Fish pond and aeration tanks)
Beverage(bottle drying)
Bio fuels/bio-gas system
Food and vegetable processing
Medical and Health service(Dental cart and dental vacuum)
Package (Air knives blown-off / Labeling/Drying)
Plastics/Rubber(Air knives blown-off/ Bottle blow moulding/ Extruder Degassing/Pneumatic conveying/ Thermoforming)
Printing
Paper and pulp/ paper converting
Textile industry
Transportation/Loading/Unloading(Pneumatic conveying/material handling)
Water treatment/sewage treatment
Woodworking(CNC Routing/bulk handling

Air Blowers Export Service:

18 months warranty

Professional engineer will help to recommend the most suitable models

after studying customers’ requirements,

OEM service available.

24 hours service online,you can touch us by email, , ,

7 days delivery time and safe shipment

Contact

Contact name : Lucy Wu [sales manager]

Mob :TEL: 4

Oil or Not:	Oil Free
Structure:	Vortex Pump
Exhauster Method:	Kinetic Vacuum Pump
Vacuum Degree:	High Vacuum
Work Function:	Compressed Air and Vacuum Solution
Working Conditions:	Dry

Customization:	Available \|

air compressor

What are the advantages of using an air compressor in construction?

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

Can you explain the basics of air compressor terminology?

Understanding the basic terminology related to air compressors can help in better comprehension of their operation and discussions related to them. Here are some essential terms related to air compressors:

1. CFM (Cubic Feet per Minute): CFM is a unit of measurement that denotes the volumetric flow rate of compressed air. It indicates the amount of air a compressor can deliver within a minute and is a crucial factor in determining the compressor’s capacity.

2. PSI (Pounds per Square Inch): PSI is a unit of measurement used to quantify pressure. It represents the force exerted by the compressed air on a specific area. PSI is a vital specification for understanding the pressure capabilities of an air compressor and determining its suitability for various applications.

3. Duty Cycle: Duty cycle refers to the percentage of time an air compressor can operate in a given time period. It indicates the compressor’s ability to handle continuous operation without overheating or experiencing performance issues. For instance, a compressor with a 50% duty cycle can run for half the time in a given hour or cycle.

4. Horsepower (HP): Horsepower is a unit used to measure the power output of a compressor motor. It indicates the motor’s capacity to drive the compressor pump and is often used as a reference for comparing different compressor models.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air delivered by the compressor. It helps in stabilizing pressure fluctuations, allowing for a more consistent supply of compressed air during peak demand periods.

6. Single-Stage vs. Two-Stage: These terms refer to the number of compression stages in a reciprocating air compressor. In a single-stage compressor, air is compressed in a single stroke of the piston, while in a two-stage compressor, it undergoes initial compression in one stage and further compression in a second stage, resulting in higher pressures.

7. Oil-Free vs. Oil-Lubricated: These terms describe the lubrication method used in air compressors. Oil-free compressors have internal components that do not require oil lubrication, making them suitable for applications where oil contamination is a concern. Oil-lubricated compressors use oil for lubrication, enhancing durability and performance but requiring regular oil changes and maintenance.

8. Pressure Switch: A pressure switch is an electrical component that automatically starts and stops the compressor motor based on the pre-set pressure levels. It helps maintain the desired pressure range in the receiver tank and protects the compressor from over-pressurization.

9. Regulator: A regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications and ensures a consistent and safe supply of compressed air.

These are some of the fundamental terms associated with air compressors. Familiarizing yourself with these terms will aid in understanding and effectively communicating about air compressors and their functionality.

China Custom Turbo Air Compressor Air Diffuser for CHINAMFG Aeration Systems small air compressor
editor by CX 2023-10-23

China Hot selling China Factory CHINAMFG Auto 12V 24V Universal Electric AC Compressor for DC 24V~72V Air-Condition Compressor Hb075z24 air compressor repair near me

Product Description

Rotary hermetic compressors use the rotating action of a roller inside a cylinder to compress the refrigerant.
Rotaries, by design, include less parts than other types of compression technology and provide an alternative,
efficient option for various applications.

High efficiency CHINAMFG rotary compressors provide enhanced reliability, reduced sound and maximum flexibility with vertical and horizontal installation options for air conditioning and refrigeration applications.
Today’s modern air conditioning and commercial refrigeration applications require high efficiency combined with the ability to utilize more eco-friendly refrigerants. CHINAMFG rotary compressors continue to lead the way.

Applicaiton:

Truck sleeper air conditioner

Electric vehicle air conditioning system

truck air conditioner
vehicle air conditioner with electric compressor
electric vehicle air conditioner
special vehicle air conditioner
vessel air conditioner
heat pump air conditioner
solar air conditioner
telecom-shelter air conditioner, etc.

After-sales Service:	None
Warranty:	12m
Classification:	Variable Capacity
Job Classification:	Rotary Type
Transmission Power:	Dynamoelectric
Cooling Method:	Air-cooled

Samples:	US$ 265/Piece 1 Piece(Min.Order) \| Request Sample

air compressor

What are the differences between stationary and portable air compressors?

Stationary and portable air compressors are two common types of air compressors with distinct features and applications. Here are the key differences between them:

1. Mobility:

The primary difference between stationary and portable air compressors is their mobility. Stationary air compressors are designed to be permanently installed in a fixed location, such as a workshop or a factory. They are typically larger, heavier, and not easily movable. On the other hand, portable air compressors are smaller, lighter, and equipped with handles or wheels for easy transportation. They can be moved from one location to another, making them suitable for jobsites, construction sites, and other mobile applications.

2. Power Source:

Another difference lies in the power source used by stationary and portable air compressors. Stationary compressors are usually powered by electricity, as they are designed for continuous operation in a fixed location with access to power outlets. They are connected to the electrical grid or have dedicated wiring. In contrast, portable compressors are available in various power options, including electric, gasoline, and diesel engines. This versatility allows them to operate in remote areas or sites without readily available electricity.

3. Tank Capacity:

Tank capacity is also a distinguishing factor between stationary and portable air compressors. Stationary compressors often have larger storage tanks to store compressed air for extended periods. The larger tanks enable them to deliver a continuous and steady supply of compressed air for longer durations without the need for frequent cycling. Portable compressors, due to their compact size and portability, generally have smaller tank capacities, which may be sufficient for intermittent or smaller-scale applications.

4. Performance and Output:

The performance and output capabilities of stationary and portable air compressors can vary. Stationary compressors are typically designed for high-volume applications that require a consistent and continuous supply of compressed air. They often have higher horsepower ratings, larger motor sizes, and higher air delivery capacities. Portable compressors, while generally offering lower horsepower and air delivery compared to their stationary counterparts, are still capable of delivering sufficient air for a range of applications, including pneumatic tools, inflation tasks, and light-duty air-powered equipment.

5. Noise Level:

Noise level is an important consideration when comparing stationary and portable air compressors. Stationary compressors, being larger and built for industrial or commercial settings, are often equipped with noise-reducing features such as sound insulation and vibration dampening. They are designed to operate at lower noise levels, which is crucial for maintaining a comfortable working environment. Portable compressors, while efforts are made to reduce noise, may produce higher noise levels due to their compact size and portability.

6. Price and Cost:

Stationary and portable air compressors also differ in terms of price and cost. Stationary compressors are generally more expensive due to their larger size, higher power output, and industrial-grade construction. They often require professional installation and may involve additional costs such as electrical wiring and system setup. Portable compressors, being smaller and more versatile, tend to have a lower upfront cost. They are suitable for individual users, contractors, and small businesses with budget constraints or flexible air supply needs.

When selecting between stationary and portable air compressors, it is essential to consider the specific requirements of the intended application, such as mobility, power source availability, air demands, and noise considerations. Understanding these differences will help in choosing the appropriate type of air compressor for the intended use.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

Air Pressure:

Air Volume:

Duty Cycle:

Size and Portability:

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

Oil-Free Air Compressors:

1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

China Hot selling China Factory CHINAMFG Auto 12V 24V Universal Electric AC Compressor for DC 24V~72V Air-Condition Compressor Hb075z24 air compressor repair near me
editor by CX 2023-10-23

China Hot selling Wholesale High Efficiency Small Air Compressor Screw-Type Air Compressor for Woodworking Industry, Wood Work Use Air Compressors Small Size air compressor oil

Product Description

Production Introduction:
This seires air compressor widely used in pneumatuic lock, pneumatic tool, tire inflation,blowing process,spray, paint,sand bklsting and fluidic element.

1) Filling station can be used for fire brigade divers base inflatable station,

2) mine, oil field chemicals, ship, climbing, water sports center industry for human rescue,

3) fire fighting, rescue, underwater operations breathing gas filling is ideal in rescue equipment.

Detail machine pictures, all photoes are for 100% real shooting !
1, Product Show

2, Specification

AIR COMPRESSOR

Model NO.

V-0.25/8D-150L

Motor Power

2.2/3/5.5(KW/HP)

Cylinder

φ 65mmX2

Speed

980rpm/min

Tank

150L/39.6Gal

Pressure

8Bar/115 Psi

Capacity

250L/min(8.8CFM)

Weight

118KG

Dimension

1300X430X865mm

3,Detail show

4, feature:

1) Well-designed specifically for small and medium sized users;

2) The operation is simple, convenient, and less prone to failure;

3) Designed for filling the air available for breathing;

4) Guarantee inflatable gas pure health, no the oil tasteless displacement, high-pressure air filling quickly;

5) Practices can be achieved without power, and to facilitate the field work;

6) Small size, light weight, easy to move quickly;

7) Cost-effective, economical and practical.

8, Company Information
HangZhou CHINAMFG Machinery Co., Ltd is 1 of the large-scale woodworking machinery manufacturer in China. The company is located in Wangtai town.

Our company is a comprehensive enterprise which is specialized in research and development, design, manufacturing, sale and service. With advanced production equipment and professional technical staff of research and development, and management. Which is formed a unique management model and the standardization of production process.

The leading products of woodworking products are CNC router, panel saw series, sanding machine series, woodworking drill machine, Pur wrapping machine, paper sticking machine, vacuum laminating machine, edge banding machine, computer engraving machine and the other series and over 60 standards. With the scientific management, unique technology, and innovative products to meet customer demands. Our products get a very high reputation from our customers at home and abroad. Our products are sold across the country and to Russia, Ukraine, Middle-East, South Africa, Southeast Asia, Central Europe and the other countries and areas. We have earned the trust of customers and our product process is in the leading level among the same industry of domestic. It creates a famous brand called “XINLIHUI” and our products sell well both at home and abroad. It is the most trusted brand to our customers.
We would like to work a new CHINAMFG development with the insight colleagues and we welcome all the new and old friends to visit our company and crest a brilliant tomorrow together.

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Arrangement:	Balanced Opposed Arrangement

Samples:	US$ 140/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the advantages of using an air compressor in construction?

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China Hot selling Wholesale High Efficiency Small Air Compressor Screw-Type Air Compressor for Woodworking Industry, Wood Work Use Air Compressors Small Size air compressor oil
editor by CX 2023-10-23

China supplier 45kw Energy Saving Low Noise Industrial Frequency Variable Frequency Screw Air Compressor air compressor oil

Product Description

HY(V)-Z Series Medium Voltage Permanent Magnet Variable Frequency Screw Air Compressor

01.Advanced Medium Voltage Dual Stage Mainframe
1. Two-stage integrated design, oil mist spray cooling is used between stages, which reduces the temperature of the air, and the compression process is close to the most energy-saving isothermal compression. In principle, two-stage compression saves 5%-8% of energy compared to single-machine compression ;
2. It is suitable for the compression ratio matching of medium voltage, the leakage in the main engine is small, and the volumetric efficiency is high;
3. The bearing adopts imported heavy-duty bearing, which makes the force of the rotor better; the two-stage rotors are HYiven by helical gears respectively, so that each stage of the rotor has the best linear speed;
4. The third-generation asymmetric rotor technology, the tooth surface is processed by the German KAPP rotor grinder, creating a high-precision rotor, which is the first guarantee for the high efficiency and stability of the host.

02.High efficiency permanent magnet synchronous motor
1. IP54 protection grade, which is more stable and reliable than IP23 in harsh environment;
2. Low temperature rise design, higher efficiency, and extended the service life of the motor;
3. Use ceramic plated bearings to completely eliminate the influence of shaft current on bearings;
4. It is made of rare earth permanent magnet materials, with large torque and small current during startup and operation;
5. With reasonable magnetic field design and magnetic density distribution, the working frequency range of energy-saving motors is wider and the operating noise is low;
6. Cooperating with the operation of the frequency converter, the frequency conversion soft start is realized, which avoids the strong mechanical impact of the machine and equipment when the motor is started at full pressure, and is conducive
to protecting the mechanical equipment, reducing equipment maintenance and improving the reliability of the equipment.

03.Special valve group
1. Intake valve: It adopts a special normally closed butterfly valve for medium voltage, with a non-return function, stable operation, high precision of air volume control, built-in noise reduction design, low cavitation noise and long service life;
2. Minimum pressure maintenance valve: special valve for medium voltage, high pressure resistance, high temperature resistance, accurate opening pressure, ensuring stable pressure in the barrel, ultra-fast return to seat, strong sealing, ensuring no backflow of gas, low pressure loss and high efficiency ;
3. Temperature control valve: The unit is equipped with a mixed-flow temperature control valve to ensure that the unit is more convenient to start in a low temperature environment, and to ensure the oil supply of the unit at any time; by controlling the oil supply temperature of the main engine to ensure that the unit is in the best performance state;
4. Oil cut-off valve: special normally closed valve for medium voltage, controlled by the exhaust pressure of the machine head. When starting up, the valve opens quickly to ensure that the compressor is lubricated and warmed up as soon as possible; when shutting down, the valve prevents oil from being ejected from the intake end.

04.Advanced and reliable electric control system
1. Large-size color LCD touch screen, with good man-machine communication interface, touch screen with anti-mistouch and sleep function;
2. It adopts double frequency conversion system, which is more energy-saving. The frequency converter and the motor are perfectly matched, and the low frequency and high torque can output 180% of the rated torque;
3. According to the characteristics of medium voltage, a special program is developed, with multiple pressure sensors and multiple temperature sensors, which can comprehensively detect the operating status of the unit, and automatically control the machine status without special care;
4. Configure the Internet of Things, you can check the operating status of the unit on the mobile phone;
5. Independent air duct design, suitable for various working conditions.

05.Silent centrifugal fan
1. Adopt centrifugal fan, brand-new separate radial cooling fan design, with special cooler, better cooling effect and more energy saving;
2. Compared with axial flow fans, centrifugal fans have higher wind pressure and lower noise;
3. Using variable frequency fan control, the oil temperature is constant, prolonging the service life of lubricating oil;
4. Due to the high wind pressure, the cooler and the filter are less likely to be blocked.

06.High quality triple filter

1. The filtration area of the air filter exceeds 150% of the normal requirement, the inlet pressure loss is low, and the energy efficiency is good;2. The oil filter adopts a full-flow built-in pressure-bearing oil filter suitable for medium voltage conditions. The rated processing capacity of the oil filter is 1.3 times the circulating oil volume. The imported filter material and the design scheme of large margin are selected, which has high filtration precision and good durability.
3. The oil is divided into special customized oil, which is designed and developed for medium-pressure working conditions, with wide applicable pressure range, good separation effect and low operating pressure loss; imported glass fiber material is selected;
4. The design of the 3 filter positions is reasonable, the maintenance is convenient, and the downtime is reduced.

07.High quality and efficient coupling
1. The coupling is a torsional elastic coupling with a failure protection function, which can effectively damp and reduce the vibration and impact generated during operation;
2. The elastic body is only under pressure and can bear a larger load, and the drum-shaped teeth of the elastic body can avoid stress concentration.

Overall energy saving of products

Compared with power frequency air compressor, energy-saving variable frequency air compressor has practical significance.
1. The pressure control of the inverter air compressor is accurate. It can quickly respond to pressure changes, adjust the speed of the permanent magnet motor, control the pressure fluctuation range within 0.1bar, stabilize the pipe network pressure, provide the necessary air volume with the most reasonable power, and reduce excess energy consumption.
2. The variable frequency air compressor adopts the method of variable frequency starting, which eliminates the CHINAMFG current of the star-delta starting, and starts smoothly. Reduce the starting power, reduce the impact on the grid and equipment, and reduce equipment operating noise.
3. The frequency conversion control is more excellent than the ordinary throttling control. The adjustment range of the flow rate is larger, and with the high-efficiency permanent magnet motor, the energy saving effect is more significant at low percentage flow rate.
4. Most of the cost in the life cycle of the air compressor is generated by the electricity it consumes. The power consumption of the compressor is closely related to the air used on site. The inverter air compressor can not only ensure smooth and guaranteed production, but also save considerable electricity bills and achieve a CHINAMFG situation for the enterprise.

Energy consumptionMaintenance cost
Purchase cost
Energy consumption-Maintenance cost
Purchase cost energy conservation

Product application scenarios
Mining equipment: used for high-pressure blasting mining, HYiving all kinds of pneumatic machinery.

Baling machine: the air compressor is used in the pneumatic baling machine. After compressing the air, the piston of the cylinder is pressed down to HYive the vibrator to move quickly, so that the overlapping part of the packing belt has a hot-melt effect.

Product case

An oil field borders the CHINAMFG Sea in the East, the central ZheJiang Plain in the west, ZheJiang Province in the southeast, and the junction of ZheJiang and HangZhou in the north. It spans 25 districts, cities and counties in ZheJiang , HangZhou and ZheJiang provinces. The exploration and development construction began in January 1964, with a total exploration and development area of 18716 square meters. The oil headquarters is located in ZheJiang Xihu (West Lake) Dis. New Area, the key development and opening-up construction area of the national “Eleventh Five Year Plan”. It is 190 kilometers away from ZheJiang , 40 kilometers away from ZheZheJiang ngang and 70 kilometers away from ZheJiang International Airport. It has a superior geographical location, developed sea, land and air transportation and convenient traffic. It is an important part of the CHINAMFG rim economic circle. HY-45z from CHINAMFG company is mainly used for pipeline purging and gas supply.

Medium voltage direct-coupled screw compressor

HY-Z	Working pressure		Capacity		Power		NOise	Air outlet	Net weight
	bar	Psig	(m3/min)	cfm	kW	hp	dB	Pipe diameter
HY-18Z	20	291	1.7	61	18	25	65 ±3	G3/4″	868
	25	364	1.7	61	18	25	65 ±3	G3/4″	868
	30	437	1.7	61	18	25	65±3	G3/4″	868
HY-22Z	20	291	2.1	74	22	30	65±3	G3/4″	900
	25	364	2.1	74	22	30	65±3	G3/4″	900
	30	437	2.1	74	22	30	65 ±3	G3/4″	900
	35	510	1.6	57	22	30	65±3	G3/4″	900
	40	583	1.6	57	22	30	65±3	G3/4″	900
HY-37Z	20	291	3.3	117	37	50	65 ±3	G3/4″	1340
	25	364	3.3	117	37	50	65±3	G3/4″	1340
	30	437	3.3	117	37	50	65 ± 3	G3/4″	1340
	35	510	3.0	106	37	50	65 ± 3	G3/4″	1340
	40	583	3.0	106	37	50	65±3	G3/4″	1340
HY-55Z	20	291	6.4	225	55	75	67±3	DN32	2100
	25	364	5.0	176	55	75	67±3	DN32	2100
	30	437	4.7	165	55	75	67 ±3	DN32	2100
	35	510	4.3	151	55	75	67±3	DN32	2100
	40	583	3.8	133	55	75	67 ±3	DN32	2100
HY-75Z	20	291	7.2	255	75	100	68±3	DN32	2300
	25	364	7.0	248	75	100	68±3	DN32	2300
	30	437	6.7	237	75	100	68±3	DN32	2300
	35	510	6.3	223	75	100	68±3	DN32	2300
	40	583	5.7	201	75	100	68±3	DN32	2300
HY-90Z	20	291	12.0	423	90	120	70 ±3	DN32	2800
	25	364	10.3	364	90	120	70±3	DN32	2800
	30	437	10.0	353	90	120	70 ±3	DN32	2800
	35	510	6.3	223	90	120	70±3	DN32	2800
	40	583	5.8	205	90	120	70±3	DN32	2800
HY-110Z	20	291	13.7	483	110	150	72 ±3	DN40	3000
	25	364	12.5	440	110	150	72 ±3	DN40	3000
	30	437	10.3	363	110	150	72 ±3	DN40	3000
	35	510	9.6	339	110	150	72 ±3	DN40	3000
	40	583	9.1	321	110	150	72 ±3	DN40	3000
HY-132Z	20	291	16.3	576	132	175	74 ±3	DN50	3200
	25	364	13.5	476	132	175	74±3	DN50	3200
	30	437	12.2	430	132	175	74 ±3	DN50	3200
	35	510	11.8	416	132	175	74 ±3	DN50	3200
	40	583	11.3	398	132	175	74 ±3	DN50	3200
HY-160Z	20	291	20.0	706	160	215	75 ±3	DN50	3600
HY-160Z	25	364	16.1	567	160	215	75 ±3	DN50	3600
HY-185Z	20	291	23.5	829	185	250	76±3	DN50	3800
HY-185Z	25	364	18.5	652	185	250	76±3	DN50	3800
HY-200Z	20	291	26.0	918	200	270	76±3	DN50	4800
	25	364	22.9	809	200	270	76±3	DN50	4800
	30	437	22.2	783	200	270	76 ±3	DN50	4800
HY-200ZW	20	291	30.2	1067	220	300	78 ±3	DN65	5000
	25	364	25.8	911	220	300	78 ±3	DN65	5000
	30	437	23.2	819	220	300	78±3	DN65	5000
	35	510	22.0	776	220	300	78±3	DN65	5000
HY-250ZW	20	291	34.2	1207	250	350	78±3	DN65	5500
	25	364	29.1	1026	250	350	78 ±3	DN65	5500
	30	437	27.5	972	250	350	78±3	DN65	5500
	35	510	25.2	888	250	350	78±3	DN65	5500
	40	583	22.8	804	250	350	78±3	DN65	5500
HY-280ZW	20	291	37.7	1330	280	375	80±3	DN65	5800
	25	364	34.0	1200	280	375	80±3	DN65	5800
	30	437	30.0	1060	280	375	80±3	DN65	5800
	35	510	27.3	965	280	375	80±3	DN65	5800
	40	583	25.0	881	280	375	80±3	DN65	5800
HY-315ZW	30	437	33.7	1189	315	422	80±3	DN65	6400
	35	510	29.8	1053	315	422	80±3	DN65	6400
	40	583	27.1	958	315	422	80±3	DN65	6400

Huayan compressor product parameter table follows
1 The exhaust gas volume value is the gas volume flow rate in the following state (temperature: 32°C, atmospheric pressure: 101.325KPa)
2. Pressure value after exhaust pressure check valve
3. The noise value is the value in the anechoic chamber, test tolerance: 3dB(A)

Medium voltage permanent magnet variable frequency screw compressor

HY(V)-Z	Working pressure		Capacity		Power		Noise	Air outlet	Net weight
HY(V)-Z	bar	psig	(m3/min)	cfm	kW	hp	dB	Pipe diameter
HYV-55Z	20	291	3.8-6.4	134-226	55	75	67±3	DN32	2200
	25	364	3.6-6.0	127-212	55	75	67±3	DN32	2200
	30	437	3.1-5.2	109-184	55	75	67±3	DN32	2200
	35	510	2.6-4.3	92-152	55	75	67±3	DN32	2200
	40	583	2.3-3.8	81-134	55	75	67±3	DN32	2200
HYV-75Z	20	291	4.6-7.7	162-272	75	100	68±3	DN32	2400
	25	364	4.5-7.5	159-265	75	100	68±3	DN32	2400
	30	437	4.0-6.7	141-237	75	100	68±3	DN32	2400
	35	510	3.8-6.3	134-222	75	100	68±3	DN32	2400
	40	583	3.0-5.0	106-177	75	100	68±3	DN32	2400
HY-90Z	20	291	6.7-11.2	237-396	90	120	70±3	DN32	2800
	25	364	6.2-10.3	219-364	90	120	70±3	DN32	2800
	30	437	6.0-10.0	212-353	90	120	70±3	DN32	2800
	35	510	4.1-6.8	145-240	90	120	70±3	DN32	2800
	40	583	3.8-6.3	134-222	90	120	70±3	DN32	2800
HYV-110Z	20	291	8.2-13.6	290-480	110	150	72±3	DN40	3100
	25	364	7.5-12.5	265-441	110	150	72±3	DN40	3100
	30	437	6.5-10.8	230-381	110	150	72±3	DN40	3100
	35	510	5.8-9.6	205-339	110	150	72±3	DN40	3100
	40	583	5.5-9.1	194-321	110	150	72±3	DN40	3100
HYV-132Z	20	291	10.1-16.8	357-593	132	175	74±3	DN40	3300
	25	364	9.0-15.0	318-530	132	175	74±3	DN40	3300
	30	437	7.9-13.1	279-463	132	175	74±3	DN40	3300
	35	510	7.1-11.8	251-417	132	175	74±3	DN40	3300
	40	583	6.8-11.3	240-399	132	175	74±3	DN40	3300
HYV-160Z	20	291	9.6-16.0	339-565	160	215	75±3	DN50	3800
	25	364	10.0-16.6	353-586	160	215	75±3	DN50	3800
	30	437	9.8-16.3	346-576	160	215	75±3	DN40	3700
	35	510	9.4-15.6	332-551	160	215	75±3	DN50	3800
	40	583	8.3-13.8	293-487	160	215	75±3	DN40	3700
HYV-185Z	20	291	14.1-23.5	498-830	185	250	76±3	DN50	4000
HYV-185Z	25	364	11.7-19.5	413-689	185	250	76±3	DN50	4000
HYV-200Z	20	291	15.6-26.0	551-918	200	270	76±3	DN50	4200
	25	364	13.7-22.9	484-809	200	270	76±3	DN50	4200
	30	437	13.3-22.2	470-784	200	270	76±3	DN50	4200
HYV-220ZW	20	291	17.8-29.7	629-1049	220	300	78±3	DN65	5000
	25	364	15.5-25.8	547-911	220	300	78±3	DN65	5000
	30	437	13.9-23.2	491-819	220	300	78±3	DN65	5000
	35	510	13.2-22.0	565-777	220	300	78±3	DN65	5000
	40	583	12.2-20.3	431-717	220	300	78±3	DN65	5000
HYV-250ZW	20	291	20.5-34.2	724-1208	250	350	78±3	DN65	5700
	25	364	17.5-29.1	618-1571	250	350	78±3	DN65	5700
	30	437	16.5-27.5	583-971	250	350	78±3	DN65	5700
	35	510	15.1-25.2	533-890	250	350	78±3	DN65	5700
	40	583	13.7-22.8	484-805	250	350	78±3	DN65	5700
HYV-280ZW	20	291	22.6-37.7	798-1331	280	375	80±3	DN65	6000
	25	364	20.4-34.0	720-1201	280	375	80±3	DN65	6000
	30	437	18.0-30.0	636-1059	280	375	80±3	DN65	6000
	35	510	16.4-27.3	579-964	280	375	80±3	DN65	6000
	40	583	15.0-25.0	530-883	280	375	80±3	DN65	6500

4. Please consult our company for use in harsh working conditions such as high temperature, high humidity, high cold and high dust
5. Dimensions and weight of the whole machine are subject to change without prior notice
5. Please do not use compressed air directly for medical equipment inhaled by the human body

Technical parameters of oil-free water-lubricated power frequency screw air compressor
HYW-G	Working pressure		Exhaust volume		Power		Noise	Air outlet pipe diameter	Net weight	Dimensions(mm)
Water lubricated series	bar	psig	(m3/min)	cfm	kW	hp	dB	Air outlet pipe diameter	kg	Length	Width	Height
HYW-7G	7	102	1	42	7.5	10	58±3	G1″	500	1135	800	1000
	8	116	1	39	7.5	10	58±3	G1″	500	1135	800	1000
	10	145	1	35	7.5	10	58±3	G1″	500	1135	800	1000
HYW-11G	7	102	2	57	11	15	58±3	G1″	500	1135	800	1000
	8	116	2	53	11	15	58±3	G1″	500	1135	800	1000
	10	145	1	46	11	15	58±3	G1″	500	1135	800	1000
HYW-15G	7	102	2	71	15	20	60±3	G1″	550	1400	1000	1200
	8	116	2	64	15	20	60±3	G1″	550	1400	1000	1200
	10	145	/	/	15	20	60±3	G1″	550	1400	1000	1200
HYW-18.5G	7	102	3	109	18.5	25	61 ±3	G1″	600	1400	1000	1200
	8	116	3	99	18.5	25	61 ±3	G1″	600	1400	1000	1200
	10	145	3	88	18.5	25	61 ±3	G1″	600	1400	1000	1200
HYW-22G	7	102	4	131	22	30	61 ±3	G1″	655	1400	1000	1200
	8	116	3	120	22	30	61 ±3	G1″	655	1400	1000	1200
	10	145	3	106	22	30	61 ±3	G1″	655	1400	1000	1200
HYV-30G	7	102	5	184	30	40	64±3	G11/2″	1150	1920	1170	1320
	8	116	5	166	30	40	64±3	G11/2″	1150	1920	1170	1320
	10	145	4	152	30	40	64±3	G11/2″	1150	1920	1170	1320
HYW-37G	7	102	6	215	37	50	64±3	G11/2″	1200	1920	1170	1320
	8	116	6	198	37	50	64±3	G11/2″	1200	1920	1170	1320
	10	145	5	177	37	50	64±3	G11/2″	1200	1920	1170	1320
HYW-45G	7	102	8	265	45	60	66±3	G11/2″	1320	1920	1170	1320
	8	116	7	240	45	60	66±3	G11/2″	1320	1920	1170	1320
	10	145	6	212	45	60	66±3	G11/2″	1320	1920	1170	1320
HYW-55G	7	102	10	353	55	75	66±3	DN50	1520	1930	1320	1535
	8	116	9	318	55	75	66±3	DN50	1520	1930	1320	1535
	10	145	8	275	55	75	66±3	DN50	1520	1930	1320	1535
HYW-75G	7	102	13	459	75	100	70±3	DN50	1620	1930	1320	1535
	8	116	12	424	75	100	70±3	DN50	1620	1930	1320	1535
	10	145	10	353	75	100	70±3	DN50	1620	1930	1320	1535
HYW-90G	7	102	16	547	90	120	70±3	DN50	1800	1930	1320	1535
	8	116	14	494	90	120	70±3	DN50	1800	1930	1320	1535
	10	145	13	441	90	120	70±3	DN50	1800	1930	1320	1535
HYW-110G	7	102	20	706	110	150	72±3	DN80	3100	2300	1600	1750
	8	116	18	636	110	150	72±3	DN80	3100	2300	1600	1750
	10	145	16	565	110	150	72±3	DN80	3100	2300	1600	1750
HYW-132G	7	102	25	883	132	175	72±3	DN80	3250	2300	1600	1750
	8	116	23	812	132	175	72±3	DN80	3250	2300	1600	1750
	10	145	20	706	132	175	72±3	DN80	3250	2300	1600	1750
HYW-160G	7	102	27	953	160	215	72±3	DN100	4500	2860	1600	1800
	8	116	26	901	160	215	72±3	DN100	4500	2860	1600	1800
	10	145	24	848	160	215	72±3	DN100	4500	2860	1600	1800
HYW-185G	7	102	30	1059	185	250	74±3	DN100	4500	2860	1600	1800
	8	116	28	989	185	250	74±3	DN100	4500	2860	1600	1800
	10	145	25	883	185	250	74±3	DN100	4500	2860	1600	1800
HYW-200G	7	102	36	1271	200	270	74±3	DN125	4800	3150	1850	2050
	8	116	33	1165	200	270	74±3	DN125	4800	3150	1850	2050
	10	145	27	953	200	270	74±3	DN125	4800	3150	1850	2050
HYW-250G	7	102	43	1519	250	350	74±3	DN125	5200	3150	1850	2050
	8	116	41	1448	250	350	74±3	DN125	5200	3150	1850	2050
	10	145	38	1342	250	350	74±3	DN125	5200	3150	1850	2050

Cooling method:(Air cooling:HYW-7G~HYW-45G), (Water cooling: HYW-55G~HYW-250G)

Technical parameters of dry oil-free power frequency screw air compressor
HYW-G Dry oil free series	Working pressure		Exhaust volume		Power		Noise	Air outlet pipe diameter	Net weight(kg)		Dimensions(mm)
	bar	psig	(m3/min)	cfm	kw	hp	dB		Air-cooled	Water-cooled	Length	Width	Height	Length	Width	Height
	bar	psig	(m3/min)	cfm	kw	hp	dB		Air-cooled	Water-cooled	Air-cooled			Water-cooled
HYW-45G	7	102	8	268	45	60	69±3	DN50	2600	2650	2200	1400	2000	2300	1500	1720
	8	116	8	268	45	60	69±3	DN50	2600	2650	2200	1400	2000	2300	1500	1720
	10	145	7	244	45	60	69±3	DN50	2600	2650	2200	1400	2000	2300	1500	1720
HYW-55G	7	102	10	339	55	75	69±3	DN50	2800	2850	2200	1400	2000	2300	1500	1720
	8	116	9	314	55	75	69±3	DN50	2800	2850	2200	1400	2000	2300	1500	1720
	10	145	8	279	55	75	69±3	DN50	2800	2850	2200	1400	2000	2300	1500	1720
HYW-75G	7	102	13	441	75	100	70±3	DN50	2900	2850	2200	1400	2000	2300	1500	1720
	8	116	13	441	75	100	70±3	DN50	2900	2850	2200	1400	2000	2300	1500	1720
	10	145	11	396	75	100	70±3	DN50	2900	2850	2200	1400	2000	2300	1500	1720
HYW-90G	7	102	16	565	90	120	71 ±3	DN50	3100	2850	2200	1400	2000	2300	1500	1720
	8	116	15	512	90	120	71 ±3	DN50	3100	2850	2200	1400	2000	2300	1500	1720
	10	145	13	456	90	120	71 ±3	DN50	3100	2850	2200	1400	2000	2300	1500	1720
HYW-110G	7	102	20	689	110	150	71 ±3	DN65	3400	3450	3000	1990	2180	2700	1800	1830
	8	116	20	689	110	150	71 ±3	DN65	3400	3450	3000	1990	2180	2700	1800	1830
	10	145	16	572	110	150	71 ±3	DN65	3400	3450	3000	1990	2180	2700	1800	1830
HYW-132G	7	102	23	812	132	175	73±3	DN65	3450	3500	3000	1990	2180	2700	1800	1830
	8	116	23	812	132	175	73±3	DN65	3450	3500	3000	1990	2180	2700	1800	1830
	10	145	20	706	132	175	73±3	DN65	3450	3500	3000	1990	2180	2700	1800	1830
HYW-160G	7	102	26	918	160	215	73±3	DN65	3550	3650	3000	1990	2180	2700	1800	1830
	8	116	26	918	160	215	73±3	DN65	3550	3650	3000	1990	2180	2700	1800	1830
	10	145	24	830	160	215	73±3	DN65	3550	3650	3000	1990	2180	2700	1800	1830
HYW-185G	7	102	30	1059	185	250	74±3	DN65	3950	4050	3000	1990	2180	2700	1800	1830
	8	116	30	1059	185	250	74±3	DN65	3950	4050	3000	1990	2180	2700	1800	1830
	10	145	26	918	185	250	74±3	DN65	3950	4050	3000	1990	2180	2700	1800	1830
HYW-200G	7	102	34	1187	200	270	74±3	DN100	/	4500	/	/	/	3100	2100	2065
	8	116	34	1187	200	270	74±3	DN100	/	4500	/	/	/	3100	2100	2065
	10	145	29	1031	200	270	74±3	DN100	/	4500	/	/	/	3100	2100	2065
HYW-250G	7	102	46	1624	250	350	74±3	DN100	/	5200	/	/	/	3100	2100	2065
	8	116	42	1483	250	350	74±3	DN100	/	5200	/	/	/	3100	2100	2065
	10	145	38	1328	250	350	74±3	DN100	/	5200	/	/	/	3100	2100	2065

FAQ

Q1: What is the rotor speed for the air end?
A1: 2980rmp.

Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)

Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).

Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.

Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.

After-sales Service:	Provide After-Sell Sevice
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Movable Type

Customization:	Available \|

air compressor

What are the advantages of using rotary vane compressors?

Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

1. Compact and Lightweight:

Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

2. High Efficiency:

Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

3. Quiet Operation:

Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

4. Oil Lubrication:

Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

5. Versatile Applications:

Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

6. Easy Maintenance:

Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

China supplier 45kw Energy Saving Low Noise Industrial Frequency Variable Frequency Screw Air Compressor air compressor oil
editor by CX 2023-10-21

China Professional Energy Saving Manufacturer Rotary CHINAMFG Machine Variable Speed Pm VSD Industrial Air Compressor air compressor repair near me

Product Description

Q1: What information do I need to provide to get the suitable machine?
1. How much air delivery capacity ( Unit:CFM or M3/Min )
2 How much working pressure ( Unit:PSI, Bar or Mpa )
3.What is the voltage and frequency of my country of residence ( V/Hz )
4. Whether I need other accessories such as air tank, filters and/or air dryers.
Tell us the answer, we will offer scheme for you!

Q2: What are the general unit conversion?
1bar = 0.1Mpa = 14.5psi 1m³/min = 35.32cfm 1KW = 1.34HP

Q3: Are you factory or trading company?
We are factory. Our factory is located in 39 Xihu (West Lake) Dis. Rd, HangZhou, ZHangZhoug

Q4: Which trade term can you accept?
FOB, CIF, CFR, EXW, etc.

Q5: How long will you take to arrange production?
15 days for Regular Products, 35 days for Customizing Models

SPECIFICATION

MODEL	LB-30-10
Ambient Temperature	-5ºC to +45 ºC
Max Pressure (bar)	10
Air Delivery (m3/min)	3.6
Compression Stage	Single Stage Compression
Cooling Method	Air Cooled
Discharge Temperature (ºC)	≤ 75ºC
Oil Cotent (ppm)	≤3
Transmission Method	Direct Drive(Non-Coupling)
Sound Level dB(A)	68±3
Lubricating Oil Amount	12.5L
Motor Power	22KW/30HP
Motor Level Of Protection	IP55
Voltage	380V/3ph/50Hz
Dimensions (mm)	1060×790×1160(LWH)
Weight	450KG
Discharge Outlet Thread	1”

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Installation Type:	Stationary Type
Type:	Twin-Screw Compressor
Max Pressure:	8bar/116psi

Samples:	US$ 1599/set 1 set(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

What are the environmental considerations when using air compressors?

When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

Energy Efficiency:

Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.

Air Leakage:

Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.

Noise Pollution:

Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.

Emissions:

While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.

Proper Waste Management:

Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.

Sustainable Practices:

Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.

By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.

air compressor

What are the different types of air compressors?

There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:

1. Reciprocating Air Compressors: Reciprocating air compressors, also known as piston compressors, use one or more pistons driven by a crankshaft to compress air. They operate by drawing air into a cylinder, compressing it with the piston’s up-and-down motion, and discharging the compressed air into a storage tank. Reciprocating compressors are known for their high pressure capabilities and are commonly used in industrial applications.

2. Rotary Screw Air Compressors: Rotary screw air compressors utilize two interlocking screws to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads. These compressors are known for their continuous duty cycle, high efficiency, and quiet operation. They are widely used in industrial, commercial, and automotive applications.

3. Centrifugal Air Compressors: Centrifugal air compressors rely on the principle of centrifugal force to compress air. They use a high-speed impeller to accelerate the incoming air and then convert the kinetic energy into pressure energy. Centrifugal compressors are commonly used in large-scale industrial applications that require high volumes of compressed air.

4. Rotary Vane Air Compressors: Rotary vane air compressors employ a rotor with sliding vanes that compress the air. As the rotor rotates, the vanes slide in and out of the rotor, creating compression chambers. Air is drawn in, trapped, and compressed as the vanes move. These compressors are compact, reliable, and suitable for small to medium-sized applications.

5. Axial Flow Air Compressors: Axial flow air compressors are primarily used in specialized applications such as aircraft engines and gas turbines. They utilize a series of rotating and stationary blades to compress air in a continuous flow. Axial flow compressors are known for their high flow rates and are designed for applications that require large volumes of compressed air.

6. Scroll Air Compressors: Scroll air compressors consist of two interlocking spirals or scrolls that compress the air. One spiral remains stationary while the other orbits around it, creating a series of expanding and contracting pockets that compress the air. Scroll compressors are compact, reliable, and commonly used in applications where low noise and oil-free air are required, such as medical and dental equipment.

These are just a few examples of the different types of air compressors available. Each type has its own advantages, capabilities, and ideal applications. The choice of air compressor depends on factors such as required pressure, flow rate, duty cycle, noise level, oil-free operation, and specific application requirements.

China Professional Energy Saving Manufacturer Rotary CHINAMFG Machine Variable Speed Pm VSD Industrial Air Compressor air compressor repair near me
editor by CX 2023-10-21

China Good quality Medical Air Compressor Hospital Central Gas Supply Machine System best air compressor

Product Description

Medical Air Compressor Hospital Central Gas Supply Machine System

Application

Hospital Gas Supply System, like medical oxygen and suction, is an important part of the centralized air supply system in modern hospitals.

Hospital Gas Supply System is mainly used in the following:
1. The power of ventilator in intensive care unit and emergency room.
2. Provide oxygen/air mixture to patients, especially those with severe illness.
3. Power as pneumatic tools in the operating room.
4. Power as a dental pneumatic tool.
5. The power for some equipment in the supply room.
6. The power of physical therapy and rehabilitation equipment.
Usually, for larger hospitals with a scale of 500-1000 beds, 3 (or two) oil-free air compressors with a gas supply of 1.5-2.0m3/min, can meet the gas needs of about 40 monitoring beds, 20 operating beds and 10 dental chairs.

Components

Hospital Gas Supply System, is composed by compressor, gas storage tank, electric control cabinet, cold and dry machine, filter, etc.
Hospital Gas Supply System:
1. Generally compressor needs 2 sets, which work alternately or cooperate, in order to improve the compression efficiency and prolong the life of the compressor.
2. Compressors usually use oil-free piston compressors or screw compressors. Piston compressor cost is lower, but the noise is larger; Screw compressors can provide stable power, but the cost is higher. The hospital can choose from it according to its actual situation.
3. The gas storage tank, like the vacuum tank, is made of carbon steel or stainless steel. The general volume is 1~3m3.
4. Most of the pipeline of compressed air system are copper pipes, and the thickness and diameter are determined according to the actual use of gas. Gas terminals are usually installed in the operating room pylon or equipment belt in the operating room.
In some countries, the supply of compressed air can also be a manifold, but it is less used.

Configuration

Item	Description	Specification	QTY
1	Screw Air Compressor	Air Compressor Model: LU-4 Power Rate: 7kw Flow rate: 0.44m3/min Pressure: 10bar Power: 380v/50HZ	1
2	Refrigeration dryer	Refrigerated Dryer Model: J2E-8GP Power Rate: 0.7kw Flow rate: 0.8m3/min Power: 220v/50HZ	1
3	Air storage tank	Volume: 0.6m3 Pressure: 10bar	1
4	High efficiency filters	4stage	1

After-sales Service:	Supplied, Onsite, Online
Warranty:	18 Months
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Samples:	US$ 3250/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

What are the environmental considerations when using air compressors?

When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

Energy Efficiency:

Air Leakage:

Noise Pollution:

Emissions:

Proper Waste Management:

Sustainable Practices:

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China Good quality Medical Air Compressor Hospital Central Gas Supply Machine System best air compressor
editor by CX 2023-10-21

China Good quality 1000889077 Double Cylinder Air Compressor for CHINAMFG Wp10h Engine Spare Parts CHINAMFG Xichai CHINAMFG CHINAMFG Man Engine with Great quality

Product Description

double cylinder air compressor for CHINAMFG wp10H engine

PART NUMBER:

1 6126 VG156013 61263-81D 3509571-53D 6126 D47- xichaiengine 3509571-29D 3509571-36D 3509571-614-571 3509571-671-2571 3509571-671-0382 C3972531 C4929623 6126 0571 6126 6126
6126 6126 6156 6126 6126571 13026014 VG156013 12273212 2W8002

Detailed Photos

WE CAN SUPPLY ALL KINDS OF ENGINE PARTS:
CONNECTING ROD,PISTON,PISTON RING,LINER,PISTON PIN,CRANKSHAFT,FLYWHEEL,FILTERS,ENGINE ASSY,CYLINDER BLOCK,STARTER,ALTERNATOR AND SO ON.

ONCE YOU SUPPLY THE ENGINE STEEL PLATE,WE CAN CHECK ALL HTE PARTS USED IN THE ENGINE.
PLEASE DO NOT HESISTATE TO CONTACT WHEN YOU DEMAND THE RELATED PRODUCTS,WE WILL GIVE BEST SERVICE.WELCOME TO INQUIRY ANYTIME

Packaging & Shipping

1. Packaging details: carton and wooden box packaging,woven bag,brown box, or according to customer requirements.

2. Delivery Period: 7-30 working days after receiving 30% deposit byTT

3. Port: HangZhou Port,China.

4. Transport: By sea, by air,DHL,FEDEX,UPS,TNT,

FAQ

1. Q:About the payment term.
A: We can accept TT,LC,PAYPAL,WESTERNUION,and so on

2.Q:About the Quality and price
   A: We supply good quality products to all our customers,give the competitive price.

3.Q:About the warranty period
   A:At least half year, some parts are even longer.

4. Q:How to make order ?
    A:Customer can contact us online,or send email with detail inquiry list,then we can
reply soon

5. Q:About the discount
A:If the quantity large,we will give
resonalbe discount.And for long time cooperation customer,we can give credit
support

After-sales Service:	Free Change for Quality Problem
Classification:	Non Variable Capacity
Transmission Power:	Turbine
Cooling Method:	Water-cooled
Model:	1000889077
Delivery:	3-10day

air compressor

How are air compressors utilized in the aerospace industry?

Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

1. Aircraft Systems:

Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

2. Ground Support Equipment:

Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

3. Component Testing:

Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

4. Airborne Systems:

In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

5. Environmental Control Systems:

Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

6. Engine Testing:

In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

7. Oxygen Systems:

In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

air compressor

Can air compressors be integrated into automated systems?

Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

Pneumatic Automation:

Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

Control and Regulation:

In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

Sequential Operations:

Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

Energy Efficiency:

Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

Monitoring and Diagnostics:

Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

air compressor

What maintenance is required for air compressors?

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

China Good quality 1000889077 Double Cylinder Air Compressor for CHINAMFG Wp10h Engine Spare Parts CHINAMFG Xichai CHINAMFG CHINAMFG Man Engine with Great quality
editor by CX 2023-10-21

China manufacturer 12V Portable Tyre Inflator Mini 150 CHINAMFG Automatic Digital Electric Car Air Tire Compressor Pump Kit air compressor CHINAMFG freight

Product Description

12V Metal dual cylinder 30 cylinders inflation pump kit

Year	Universal	Certification	CE,ROHS
Voltage	12V	Item	12V dual cylinder inflation pump
Function	Power Indicator, Tire Pressure Monitor, Heavy Duty	Air volume	35L/min
Type	12v Digital Tire Inflator	Weight	4kg
Material	Metal, ABS	Power	180W
Application	Inflate Air Products

Why Choose Us

Rich product experience

about 11years specilied in power supply engineering.

Professional R&D team

have a professional team and extensive cooperation with universities.

Quality assurance

have a strict quality management system and our products have passed ISO,CQC certification.

Attentive service

providing lifetime technical service and at least 12-month warranty and we accept OEM and ODM services.

Company Profile

ZheJiang EDSUN ELECTRICAL SCIENCE AND TECHNOLOGY CO.,LTD, established in 2011 and located in HangZhou CITY,ZheJiang PROVINCE. EDSUN is a professional company engaged in the manufacture of power supply systems and power supply device for the power supply engineering , and also focus on research, manufacturing, marketing and after-service of DC Power Supply ,Power Supply Equipment, Portable ev charger,car jump starter ,portable power station, Home energy storage system ,lifepo4 home energy storage battery ,inverter,solar panel,ups power ,emergency backup power supply ,battery charger,vehicle parts &accessories etc. Along with its rapid development recent years, we have the production workshop and research laboratory around 2000 square meters, 6 cycle production lines and 6 cycle test lines. Our company has registered the trademarks of “EDSUN, DURANT, LECXIHU (WEST LAKE) DIS.CHE”, owned 10 software copyrights, 9 utility model patents and 3 invention patents with highly reputation in domestic and overseas. At the same time, we are dedicated to strict quality control and thoughtful customer service and obtained I S O 9 0 0 1, I S O 4 5 0 0 1, I S O 1 4 0 0 1 , 3 A class and CE certificates. And our company even has established extensive cooperation and further communication with colleges, universities, and research institutions, it has formed a school-enterprise scientific research alliance to achieved great results. Never being satisfied and keep making progress is the core spirit of EDSUN, and we will still insist on contributing its strength to our country and even for the world in the field of Power Supply, ev charger ,home energy storage.auto parts

FAQ

A) How could I get a sample? You will be charged a sample price plus all related shipping costs. Express delivery charge depends on the quantity of the samples.

B)What can you buy from us? Intelligent Control System, Direct Current Power Supply,Power Supply Equipment, Portable Charging Pile, All kinds of Automatic Components,

C)Why should you buy from us not from other suppliers?

we can provide affordable prices, reliable quality, customized service, professional after-service.

D)What services can we provide? MOQ:One sample order is available. Delivery terms:EXW, FOB, CIF. Packing:standard export packing,including instructions and certificate. OEM/ODM is available. Shipment:Express(Fedex, DHL, UPS &TNT)or forwarder Warranty:At least 1 year free repair for quality warranty, and lifetime free online after-service

E)How can we guarantee quality? Strict detection during production. Strict sampling inspection on products before shipment and intact product packaging ensured.

After-sales Service:	Yes
Warranty:	6 Months
Certification:	CE

Samples:	US$ 18/Set 1 Set(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can air compressors be used for cleaning and blowing dust?

Yes, air compressors can be effectively used for cleaning and blowing dust in various applications. Here’s how air compressors are utilized for these purposes:

1. Cleaning Machinery and Equipment:

Air compressors are commonly used for cleaning machinery and equipment in industries such as manufacturing, automotive, and construction. Compressed air is directed through a nozzle or blowgun attachment to blow away dust, debris, and other contaminants from surfaces, crevices, and hard-to-reach areas. The high-pressure air effectively dislodges and removes accumulated dust, helping to maintain equipment performance and cleanliness.

2. Dusting Surfaces:

Air compressors are also employed for dusting surfaces in various settings, including homes, offices, and workshops. The compressed air can be used to blow dust off furniture, shelves, electronic equipment, and other objects. It provides a quick and efficient method of dusting, especially for intricate or delicate items where traditional dusting methods may be challenging.

3. Cleaning HVAC Systems:

Air compressors are utilized for cleaning HVAC (Heating, Ventilation, and Air Conditioning) systems. The compressed air can be used to blow dust, dirt, and debris from air ducts, vents, and cooling coils. This helps improve the efficiency and air quality of HVAC systems, preventing the buildup of contaminants that can affect indoor air quality.

4. Blowing Dust in Workshops:

In workshops and garages, air compressors are often used to blow dust and debris from workbenches, power tools, and work areas. Compressed air is directed to blow away loose particles and maintain a clean and safe work environment. This is particularly useful in woodworking, metalworking, and other trades where dust and debris can accumulate during the manufacturing or fabrication processes.

5. Cleaning Electronics and Computer Equipment:

Air compressors are employed for cleaning electronics and computer equipment. The compressed air is used to blow dust and debris from keyboards, computer cases, circuit boards, and other electronic components. It helps in preventing overheating and maintaining the proper functioning of sensitive electronic devices.

6. Industrial Cleaning Applications:

Air compressors find extensive use in industrial cleaning applications. They are employed in industrial settings, such as factories and warehouses, for cleaning large surfaces, production lines, and equipment. Compressed air is directed through specialized cleaning attachments or air-operated cleaning systems to remove dust, dirt, and contaminants efficiently.

When using air compressors for cleaning and blowing dust, it is important to follow safety precautions and guidelines. The high-pressure air can cause injury if directed towards the body or sensitive equipment. It is advisable to wear appropriate personal protective equipment, such as safety glasses and gloves, and ensure that the air pressure is regulated to prevent excessive force.

Overall, air compressors provide a versatile and effective solution for cleaning and blowing dust in various applications, offering a convenient alternative to traditional cleaning methods.

air compressor

How do you choose the right air compressor for woodworking?

1. Required Air Volume (CFM):

2. Tank Size:

3. Maximum Pressure (PSI):

4. Noise Level:

5. Portability:

6. Power Source:

7. Quality and Reliability:

8. Budget:

air compressor

How is air pressure measured in air compressors?

China manufacturer 12V Portable Tyre Inflator Mini 150 CHINAMFG Automatic Digital Electric Car Air Tire Compressor Pump Kit air compressor CHINAMFG freight
editor by CX 2023-10-21

China manufacturer 7.4bar 64.1cfm 11kw Ga11 CHINAMFG Screw Air Compressors Oil-Injected Industrial Rotary Compressor Air-Compressors 12v air compressor

Product Description

We are authorized distributer of atlas copco, we could provide whole product line of
Atlas Copco air compressors , spare parts and consumables. we are also
certified supplier by international authoritative certification
organizations.

Kindly advise your technical requirements, we will recommend suitable
compressed air system and spare parts for you .

We can provide CHINAMFG One-Stop Service,and efficient energy – saving solutions for you .

Related compressor spare parts:

Air Compressor Daily Consumables	Air/oil/pipeline Filter,Oil Separator,Lubricant.
Air Compressor Electrial Components	Pressure/temprature sensor,Differential pressure Sensor,pressure/temp.switch.
Air Compressor Preventive Maintenance Kit	Min.pressure Kit,Oil stop kit,Check Valve Kit,Unloading Valve kit,Safety valve kit and so on.
Air compressor Motor	Main Motor,Fan Motor.
Air Compressor Spare parts	hose,o-ring,oil level guage,shaft,gear wheel,display,diaphragm,coupling.
Air Compressor rotor	for Atlas Copco,Ingersoll Rand,Sullair,CompAir,Fusheng,Quincy,Chicago Pneumatic.
Air Compressor Cooler	After Cooler,Oil Cooler.

Products Description

Industrial equipment, printing service, pipelines,power plants, oil&gas, oil refinery, coating, painting,
plastics, steel industry, rubber, mechanical, blow molding, color sorter machine, shipyard, sandblasting,
metallurg,etc.

Different industries correspond to different air compressors, kindly please send me your application
areas and specific conditions, then will recommend the most suitable products for you .

Shipping
We can provide CHINAMFG standard packaging or OEM packaging.

1 Q: How about the quality of products ?

A: We are authorized distributer of Atlas Copco. Don’t worry the quality and service.

2 Q: How long is your delivery lead time ?

A: If there is stock, the lead time is about 3 working days after we get the payment, if need to
be produced, it depends.

3 Q: How about your overseas after-sale service?

A: (1)Provide customers with intallation and commissioning online instructions.

(2)Worldwide agents and sfter service available.

4 Q: Can you accept OEM&ODM orders?

A: Yes, we have professional design team, OEM&ODM orders are highly welcomed.

Warranty:	1 Year
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type

Customization:	Available \|

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

Air compressors are used to supply compressed air for the combustion process in power generation. In fossil fuel power plants, such as coal-fired or natural gas power plants, compressed air is required to deliver a steady flow of air to the burners. The compressed air helps in the efficient combustion of fuel, enhancing the overall performance and energy output of the power plant.

2. Instrumentation and Control:

Air compressors are utilized for instrumentation and control systems in power generation facilities. Compressed air is used to operate pneumatic control valves, actuators, and other pneumatic devices that regulate the flow of steam, water, and gases within the power plant. The reliable and precise control provided by compressed air ensures efficient and safe operation of various processes and equipment.

3. Cooling and Ventilation:

In power generation, air compressors are involved in cooling and ventilation applications. Compressed air is used to drive air-operated cooling fans and blowers, providing adequate airflow for cooling critical components such as generators, transformers, and power electronics. The compressed air also assists in maintaining proper ventilation in control rooms, substations, and other enclosed spaces, helping to dissipate heat and ensure a comfortable working environment.

4. Cleaning and Maintenance:

Air compressors are employed for cleaning and maintenance tasks in power generation facilities. Compressed air is utilized to blow away dust, dirt, and debris from equipment, machinery, and electrical panels. It helps in maintaining the cleanliness and optimal performance of various components, reducing the risk of equipment failure and improving overall reliability.

5. Pneumatic Tools and Equipment:

In power generation plants, air compressors provide the necessary compressed air for operating pneumatic tools and equipment. These tools include impact wrenches, pneumatic drills, grinders, and sandblasting equipment, which are utilized for installation, maintenance, and repair tasks. The high-pressure air generated by compressors enables efficient and reliable operation of these tools, enhancing productivity and reducing manual effort.

6. Nitrogen Generation:

Sometimes, air compressors are used in power generation for nitrogen generation. Compressed air is passed through a nitrogen generator system, which separates nitrogen from other components of air, producing a high-purity nitrogen gas stream. Nitrogen is commonly used in power plant applications, such as purging systems, blanketing in transformers, and generator cooling, due to its inert properties and low moisture content.

7. Start-up and Emergency Systems:

Air compressors are an integral part of start-up and emergency systems in power generation. Compressed air is utilized to power pneumatic starters for gas turbines, providing the initial rotation needed to start the turbine. In emergency situations, compressed air is also used to actuate emergency shutdown valves, safety systems, and fire suppression equipment, ensuring the safe operation and protection of the power plant.

Overall, air compressors contribute to the efficient and reliable operation of power generation facilities, supporting combustion processes, control systems, cooling, cleaning, and various other applications critical to the power generation industry.

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

Can you explain the basics of air compressor terminology?

China manufacturer 7.4bar 64.1cfm 11kw Ga11 CHINAMFG Screw Air Compressors Oil-Injected Industrial Rotary Compressor Air-Compressors 12v air compressor
editor by CX 2023-10-21