Tag Archives: food compressor

China Standard 20HP 15kw VSD Screw Air Compressor for Medical, Food Packaging Plant with Good quality

Product Description

VSD screw air compressor

♦ Intelligent Touch-Screen Design

♦ Direct  Driver

♦ Oil Gas Separator

♦ Oil Filter

♦ Air Filter 

♦ Stainless Steel

♦ Piping Design

Product features
One shaft type structure
1. Permanent magnet motor and airend use the embedded integrated Shaft connecting structure, more compact, 100% transmission Efficiency.
2. No motor bearings, eliminating the motor bearing fault points. Different speeds, permanent magnet
 
 
motor with high efficiency, Remarkable energy-saving effect
1. At rated speed point, permanent magnet motor efficiency is higher Than ordinary motors.
2. Under low motor speed, permanent magnet motor can still keep high Motor efficiency. If the gas consumption less, it still keeps extremely High efficiency. Compared with common frequency conversion
3: Motor, the motor efficiency appears obvious gap and the air Compressor has effective energy saving
It has the integrated structure, configuration of high efficiency Permanent magnet motor, small size, saving space, easy disassembly. Deloying efficient permanent magnet variable frequency controllor, it Small volume, low noise Can change the speed of the permanent magnet motor according to The exhaust volume, it will achieve lower operation noise than ordinary Ones.
4. Permanent magnet motor has high performance NdFeB permanent Magnet, 120 º Cwithout loss of excitation, and service life of over 15 Years.
5. Stator coil adopts special inverter corona resistant enamelled wire. Insulation performance and longer service life.
6. Realizing soft start, the motor current will not exceed the full load Current during operation, and greatly reduce the impact on network Equipment, no damage to electrical equipment.OSG-EZV series permanent magnet compressor Stable operation.

Energy-saving advantages:
a. Permanent magnet motor has high performance NdFeB permanent Magnet, 120 º Cwithout loss of excitation, and service life of over 15 Years.
b. Stator coil adopts special inverter corona resistant enamelled wire. Insulation performance and longer service life.
c. Realizing soft start, the motor current will not exceed the full load Current during operation, and greatly reduce the impact on network Equipment, no damage to electrical equipment.OSG-EZV series permanent magnet compressor
Energy-saving advantages:
 
Condition energy saving
1: The permanent magnet motor remains high efficiency at low speeds, ensuring Obvious energy-saving advantages in small air volume.
2: Frequency range from 0%-100% (common conversion from 60%-100%)
3: Compared with the fixed speed compressor, energy saving 22%-40%
4: Compared with the common inverter compressor, energy saving 5%-15%
5: System volume fluctuations larger, then energy-saving effect more obviously.
6: Energy saving system of unloading (inverter):
According to the stationary air compressors in gas consumption fluctuation, it has the unloading time, then the air compressor idling but also need 45% of the Electricity, but the permanent-magnet frequency air compressor will control for Inverter, no unloading and no waste. If the air compressor units become larger,
Energy saves more. Save the wasted electric energy by pressure control bandwidth (energy saving):
Fixed compressor must set a minimum control pressure for the 1Barg band (i. E. Air Compressor limits) to avoid the impact on the unit and the power grid. Several Machines must use together with a pressure gradient, more wide pressure, while the OSG permanent-magnet variable-frequency Air compressor series is inverter control,Unlimited stop, no need to set pressure, but a pressure point on the line. The pressureOf each 0.14Barg bandwidth, the system can save energy 1%.
 
Energy saving startup (inverter):
Air compressor’ s starting current is 3-6 times of the rated current, the frequently Start will waste a lot of energy, and frequency conversion type has no frequent Starting and stopping, but soft start. The maximum current does not exceed the Rated working current, no energy waste. At the same time also greatly reduce the Impact on network equipment, and no damage to electrical equipment OSG company has obtained a compressor production license(certificate NO: XK06-571-0571), has obtained a quality systemCertificate and general machinery certificate. Product design,Manufacturing processes are strict in accordance with ISO9001: 2008 quality system standards

 

Model Pressure
(mpa)
Displacement
(m³/min)
Power
(kw)
Dimension
(mm)
Weight
(kg)
Outlet Size
VSD-0.7/7.5 0.7  1.20  7.5 840*620*850 450 G3/4″
VSD-0.8/7.5 0.8  1.10 
VSD-1.0/7.5 1.0  0.95 
VSD-1.3/7.5 1.3  0.80 
VSD-0.7/11 0.7  1.70  11 1150*750*1571 500 G1″
VSD-0.8/11 0.8  1.60 
VSD-1.0/11 1.0  1.40 
VSD-1.3/11 1.3  1.20 
VSD-0.7/15 0.7  2.40  15 1150*750*1571 550 G1″
VSD-0.8/15 0.8  2.20 
VSD-1.0/15 1.0  2.00 
VSD-1.3/15 1.3  1.70 
VSD-0.7/22 0.7  3.80  22 1300*850*1140 620 Rp1 1/4″
VSD-0.8/22 0.8  3.50 
VSD-1.0/22 1.0  3.20 
VSD-1.3/22 1.3  2.90 
VSD-0.7/37 0.7  6.40  37 1500**950*1230 1571 Rp1 1/2″
VSD-0.8/37 0.8  6.10 
VSD-1.0/37 1.0  5.70 
VSD-1.3/37 1.3  5.00 
VSD-0.7/45 0.7  8.00  45 1500**950*1230 1050 Rp1 1/2″
VSD-0.8/45 0.8  7.70 
VSD-1.0/45 1.0  7.00 
VSD-1.3/45 1.3  5.80 
VSD-0.7/55 0.7  10.50  55 1800*1250*1600 1500 Rp2″
VSD-0.8/55 0.8  9.80 
VSD-1.0/55 1.0  8.70 
VSD-1.3/55 1.3  7.60 
VSD-0.7/75 0.7  13.60  75 1950*1250*1650 1600 Rp2″
VSD-0.8/75 0.8  13.30 
VSD-1.0/75 1.0  11.60 
VSD-1.3/75 1.3  9.80 
VSD-0.7/90 0.7  16.30  90 2571*1250*1650 1800 DN65
VSD-0.8/90 0.8  16.00 
VSD-1.0/90 1.0  14.60 
VSD-1.3/90 1.3  12.30 
VSD-0.7/110 0.7  20.30  110 2460*1500*1800 4000 DN65
VSD-0.8/110 0.8  19.40 
VSD-1.0/110 1.0  17.30 
VSD-1.3/110 1.3  14.60 
VSD-0.7/132 0.7  24.00  132 2460*1500*1800 4500 DN65
VSD-0.8/132 0.8  23.00 
VSD-1.0/132 1.0  20.00 
VSD-1.3/132 1.3  18.00 
VSD-0.7/160 0.7  28.00  160 2580*1600*1980 4800 DN65
VSD-0.8/160 0.8  26.50 
VSD-1.0/160 1.0  22.50 
VSD-1.3/160 1.3  20.10 
VSD-0.7/185 0.7  32.50  185 2800*1700*2030 5200 DN65
VSD-0.8/185 0.8  31.00 
VSD-1.0/185 1.0  28.00 
VSD-1.3/185 1.3  25.10 
VSD-0.7/250 0.7  43.50  250 3400*2000*2100 6200 DN100
VSD-0.8/250 0.8  42.00 
VSD-1.0/250 1.0  38.10 
VSD-1.3/250 1.3  34.60 

 ZheJiang CHINAMFG Gas Compressor Manufacturing Co.,Ltd. founded in 2005, is a leading high technology of machine and equipment manufacturer integrating the design, R&D, production, sales and service for air compressors & Mining Equipment. Adopting advanced technology, design concept and quality control, and we are able to provide customized products to meet customers’ OEM needs.
Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With the total 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
We offer the following products and services:
1. Screw air compressor
    1.1 Oil-free screw air compressor
    1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
    2.1 Piston air compressor
    2.2 Oil-free piston air compressor
    2.3 Piston medium & high-pressure air compressor
3.Portable air compressor & Mining Equipment
    3.1 Diesel or Electric portable screw air compressor
    3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
4. Air compressor accessories
    4.1 CHINAMFG or Adsorption compressed air drier
    4.2 Compressed air filter or tank
    4.3 Lubrication oil
We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will ensure each compressor has reliable quality and has a complete record to trace, if needed.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q: How can we start order with your factory?
A: First, leave us an inquiry and advise which item you’re interested, and then we will contact you in 24 hours. You’re so kind if provide all detailed information, will better for us to know exactly what you need.

Q: What are your MOQ?
A: Different products have different MOQ, most is 1 set.

Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.

Q: How about your delivery time?
A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Do you a trade company or real factory?
A: We are 100% factory; we located in ZheJiang city, China.

After-sales Service: Online Support
Warranty: 1 Years
Lubrication Style: Lubricated
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

How do you troubleshoot common air compressor problems?

Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

1. No Power:

  • Check the power source and ensure the compressor is properly plugged in.
  • Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
  • Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

  • Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
  • Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
  • Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

  • Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
  • Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
  • Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

  • Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
  • Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
  • Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

  • Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
  • Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
  • Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

  • Ensure the compressor’s cooling system is clean and unobstructed.
  • Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
  • Verify that the compressor is not being operated in an excessively hot environment.
  • Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
  • Consider using a thermal overload protector to prevent the motor from overheating.

If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China Standard 20HP 15kw VSD Screw Air Compressor for Medical, Food Packaging Plant   with Good qualityChina Standard 20HP 15kw VSD Screw Air Compressor for Medical, Food Packaging Plant   with Good quality
editor by CX 2023-10-18