Product Description
Product Description
1.Natural Teak weathers to a beautiful silver-grey patina over time. This weathering process will vary depending on climate, exposure to the elements, and commitment to care and maintenance.
2.Teak expands and contracts with changes in climate. Shrinking of the wood can result in hairline cracks in the assembly joints or the grain of the wood itself. This does not affect the structural integrity of the frame’s construction.
3.We strongly recommend using our custom-fit outdoor covers to protect furniture from the elements and minimize aging.
Company Information
FAQ
Q: What can be done if products are damaged when I receive them ? A: Don’t worry. If the damage is proved to happen before loading, we’ll hold the responsibility and replace them for you. If it’s proved to happen during the sea transportation and our term is CIF, we will claim this to our insurance company and pay you the compensation. If the term is FOB, you will need to claim this to your insurance company or shipping company on your own.
Q: Can I order 1 set for sample? A: Yes, sample order is acceptable for us. But usually a sample will cost much more for our factory. Hope you understand. In order to provider more specific information, may I know whether this sample is for showroom retailing or for sample room display? And may I know more about your company? Is outdoor product new in your company? Please don’t hesitate to contact us if you have any question. Look CHINAMFG to receiving more details from you.
Q : Can I leave my cushions outside all year round? A:Cushions should be stored for the winter in climates exposed to snow and freezing temperatures. Cushions should be cleaned and allowed to air dry before placing into storage. Always store cushions in a dry, well ventilated area.
| Material: | Wood |
|---|---|
| Style: | Simple |
| Usage: | Bar, Hotel, Dining Room, Outdoor |
| Folded: | Unfolded |
| Customized: | Customized |
| Condition: | New |
| Customization: |
Available
|
|
|---|
Can I repurpose indoor furniture for outdoor use with the right treatment?
Repurposing indoor furniture for outdoor use is possible with the right treatment and considerations. Here are some important points to keep in mind:
1. Furniture Material:
Consider the material of the indoor furniture before repurposing it for outdoor use. Certain materials are better suited for outdoor conditions, such as teak, aluminum, wrought iron, and certain types of synthetic materials. These materials are more resistant to moisture, UV rays, and other outdoor elements.
2. Moisture and Waterproofing:
Outdoor environments expose furniture to moisture, rain, and humidity. To repurpose indoor furniture for outdoor use, it’s essential to ensure it is adequately protected against moisture. Use waterproofing treatments, sealants, or outdoor-grade paints to create a protective barrier that prevents water absorption and helps prevent warping, rotting, or mold growth.
3. UV Protection:
Indoor furniture is not designed to withstand prolonged exposure to direct sunlight. UV rays can cause fading, discoloration, and deterioration of materials. Apply UV-resistant finishes or use protective covers to shield the repurposed furniture from excessive sunlight. Additionally, consider placing the furniture in shaded areas to minimize direct UV exposure.
4. Maintenance Requirements:
Outdoor furniture typically requires more maintenance compared to indoor furniture. Before repurposing indoor furniture, be prepared to invest time and effort into regular cleaning, inspections, and maintenance. Follow the manufacturer’s instructions for care and maintenance, including cleaning techniques, recommended cleaning products, and frequency of maintenance tasks.
5. Consider Climate and Weather:
Take into account the climate and weather conditions of your area. If you live in an area with extreme temperatures, high humidity, or frequent rain, the repurposed indoor furniture may be more susceptible to damage. Assess whether the furniture can withstand the local climate and weather patterns before repurposing it for outdoor use.
6. Safety Considerations:
Ensure that repurposed indoor furniture is safe for outdoor use. Check for stability, structural integrity, and any potential hazards. Outdoor furniture needs to withstand environmental factors such as wind, rain, and uneven surfaces. Reinforce or repair any weak or damaged areas to ensure the safety of users.
7. Longevity and Lifespan:
Repurposed indoor furniture may have a shorter lifespan when used outdoors due to the harsher conditions. Consider the expected longevity of the repurposed furniture and determine if it aligns with your needs and expectations. Keep in mind that even with proper treatment, the furniture may still wear out faster than purpose-built outdoor furniture.
8. Personal Style and Aesthetics:
Repurposing indoor furniture for outdoor use allows you to bring your personal style and aesthetics into your outdoor space. Consider the design, colors, and overall look of the furniture to ensure it complements your outdoor environment and desired aesthetic.
While it is possible to repurpose indoor furniture for outdoor use with the right treatment, it’s important to carefully evaluate the suitability of the furniture and consider the factors mentioned above. Adhering to proper treatment methods and maintenance routines can help extend the lifespan of repurposed furniture and enhance your outdoor living experience.
What are the ideal materials for garden furniture cushions that won’t absorb moisture?
When selecting cushions for garden furniture, it’s important to choose materials that won’t absorb moisture to ensure durability and easy maintenance. Here are some ideal materials for garden furniture cushions that are resistant to moisture:
1. Solution-Dyed Acrylic:
Solution-dyed acrylic is a popular choice for outdoor cushions as it is highly resistant to moisture absorption. The fibers are dyed before they are spun into yarn, resulting in color that permeates the entire fiber. This material is known for its fade resistance, water repellency, and resistance to mold and mildew. Solution-dyed acrylic cushions are also generally easy to clean and maintain.
2. Polyester:
Polyester is another suitable material for garden furniture cushions that won’t absorb moisture. It is naturally resistant to water and dries quickly. Polyester cushions are also generally resistant to fading, staining, and mildew. Look for cushions made from high-quality, outdoor-grade polyester fabric for optimal performance.
3. Olefin:
Olefin is a synthetic fiber that is resistant to moisture, mold, and mildew. It has excellent water repellency and dries quickly, making it a suitable choice for outdoor cushions. Olefin is also known for its durability and colorfastness, retaining its vibrant colors even with prolonged exposure to sunlight.
4. PVC-Coated Polyester:
PVC-coated polyester cushions are designed to be highly water-resistant. The polyester fabric is coated with a layer of polyvinyl chloride (PVC) that creates a waterproof barrier. This coating prevents moisture absorption and makes the cushions easy to clean. PVC-coated polyester cushions are often used in marine and outdoor settings due to their excellent water resistance.
5. Quick-Dry Foam:
In addition to the cushion fabric, consider the type of foam used inside the cushions. Quick-dry foam is a high-performance foam that is designed to allow water to quickly drain and evaporate. This foam helps prevent moisture retention inside the cushions, reducing the risk of mold and mildew growth. Quick-dry foam is an excellent choice for outdoor cushions that need to withstand wet conditions.
6. Mesh or Ventilated Fabrics:
Another option for moisture-resistant cushions is to choose fabrics with mesh or ventilated designs. These fabrics allow air to circulate more freely, facilitating faster drying and reducing the chances of moisture buildup. Mesh or ventilated cushions can be particularly beneficial in humid climates or areas prone to heavy rainfall.
When selecting cushions for your garden furniture, look for materials that offer both comfort and moisture resistance. Consider the specific climate and weather conditions in your area to ensure the cushions are suitable for outdoor use. Regular cleaning and proper maintenance will also help extend the lifespan of your cushions and keep them in good condition.
How can I protect my garden furniture from the elements during the winter?
Protecting your garden furniture from the harsh winter elements is essential to prolong its lifespan and keep it in good condition. Here are several steps you can take to protect your furniture:
1. Clean and Dry:
Before winter arrives, thoroughly clean your garden furniture to remove any dirt, leaves, or debris. Allow it to dry completely to prevent the growth of mold or mildew during storage.
2. Store Indoors:
If possible, store your garden furniture indoors during the winter months. A garage, shed, or basement can provide protection from the elements. This is the most effective way to safeguard your furniture from extreme cold, moisture, and snow.
3. Use Furniture Covers:
If indoor storage is not possible, use weatherproof furniture covers to protect your outdoor furniture. Choose covers made from durable materials that are designed to withstand winter conditions. Ensure that the covers are secure and provide full coverage for each piece of furniture.
4. Elevate and Protect:
If you cannot store your furniture indoors and it is not practical to cover each piece, elevate the furniture off the ground to prevent contact with wet or frozen surfaces. You can use wooden pallets or furniture risers for this purpose. Additionally, consider using waterproof tarps or plastic sheets to provide temporary protection from rain or snow.
5. Remove Cushions and Upholstery:
If your furniture has removable cushions or upholstery, it’s advisable to store them indoors during the winter. This will prevent them from becoming damp, stained, or damaged by freezing temperatures. Clean and dry the cushions before storing them to maintain their condition.
6. Apply Protective Coatings:
Before winter sets in, consider applying protective coatings to your wooden or metal furniture. For wooden furniture, use an outdoor furniture oil or sealant to protect it from moisture and prevent cracking or warping. Metal furniture can benefit from a coat of rust-resistant paint or a protective spray.
7. Regular Maintenance:
Throughout the winter, periodically check on your stored or covered furniture and ensure that the covers are in good condition. Remove any accumulated snow or debris to prevent damage. If necessary, reapply protective coatings or make repairs to maintain the furniture’s integrity.
By following these steps, you can effectively protect your garden furniture from the winter elements and ensure its longevity. Remember, proper storage, covers, and maintenance are key to keeping your furniture in excellent condition for many seasons to come.
editor by CX 2023-11-08
China Custom French Style Garden Outdoor Furniture for Restaurant Cafe Hotel PE Rattan Round Bar Counter Stool a/c vacuum pump
Product Description
Projects And Customer Feedbacks
Products Description
| Product Name | French Style Garden Outdoor Furniture For Restaurant Cafe Hotel PE Rattan Round Bar Counter Stool |
| Item Number | CH-454-K |
| Dimension | Factory standard |
| Material | Aluminium frame+PE Rattan |
| MOQ | 30pcs |
| Color | Optional |
| Packing | K=K carton with plywood frame |
| Application | Bar/Restaurant/Cafe/Dining Room/Hotel/Home |
| Payment Term | T/T, Western Union, Paypal or negotiable |
| Noticed | Listed price is for reference only. Accuracy of pricing CHINAMFG on quantities, CHINAMFG and dollar fluctuations. FOB term only apply to full 40ft container. Please enquire for a quote. |
Certification
Company Information
Serenity CHINAMFG Co., Ltd is a modern furniture manufacturer based in HangZhou, ZheJiang , China. We specialize in providing dining chairs, bar stools, hotel chairs, cafe tables, dining tables and related products. Our products are exported to over 100 foreign countries and regions in Europe, America, Middle East, Australia and New Zealand, We focus primarily on restaurant, cafe and hotel commerical furniture project .Standing out from our competitors by focusing on A class quality and service, we are dedicated to offering you the best furniture with the best price.
Showroom
Production and Package
The advantages of our factory.
1.Low MOQ, we can accommodate your quantity, even if it is small.
2.OEM accepted, products can be CHINAMFG based on your requirements.
3.Good quality, we have very strict quality control.
4.Best price, we will give you the most competitive price.
5.Accurate delivery time, we will make sure the goods are delivered to you on time.
6.Good service, quick response, try our best to help.
7.Good English, Easy communication.
FAQ
(1) What is your MOQ?
Depends on the item, some are 50pc, some are 20pc.
(2) What is the loading port?
HangZhou, HangZhou.
(3) What is your payment term?
T/T or online transactions.
(4) What is your delivery time?
Manufacture takes about 30-45 days (depending on the complexity of the order) after the deposit has been received. Then shipping time CHINAMFG on where you would like your products shipped to. Stocked items will be faster.
(5) Can i visit your factory?
Sure. We warmly welcome you to visit our factory. Please contact us to make an appointment.
(6) What’s your payment term?
Generally, our payment term is FOB or EXW. If you want to do CIF or CFR, we can quote for you. We require a 50% deposit prior to manufacture and the balance prior to shipping.
(7) Do you have the products in stock?
We have some in stock. Please enquire for what we have available.
(8) What are your warranty terms?
We provide a 1 year warranty for structure and workmanship.
(9) Can i order a sample from you?
Yes, we will charge double price for the sample with the excess put toward your main order when you place it.
(10) Can i use my own fabric or other materials?
Yes, please send the CHINAMFG to our factory before the production. However, we are not responsible for the international delivery cost, any tax or delays caused by late arrival.
(11) How can I make a change or cancel my order?
Making a change to your order is only allowed before production. Once your order has been produced, the order cannot be cancelled or returned. If you require a small change, you may be charged extra according to the situation.
(12) How can I be certain the product is correct and up to standard?
Before we produce the products we will double check all the details with you. For large orders with minimal time restrictions we can make a sample first. If everything is correct, we will continue on to the production.
(13) How does your factory do quality control?
Our quality inspections will take place during each stage of the production process. Also, you are welcome to come to our factory to make an inspection before shipment. When you are satisfied with the product and make the payment, then we will make the shipment.
(14) What happens if my products are damaged?
If the products have been damaged during transportation from China to your destination, please take pictures and send the details to us. If you are concerned about damage occurring, we can purchase insurance for the shipping.
| Material: | Rattan / Wicker |
|---|---|
| Style: | Nordic |
| Folded: | Unfolded |
| Usage: | Hotel, Dining Room, Outdoor |
| Condition: | New |
| Customized: | Customized |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Are there any specific outdoor furniture recommendations for hot and sunny climates?
When choosing outdoor furniture for hot and sunny climates, it’s important to consider materials and features that can withstand the intense heat and sun exposure. Here are some specific recommendations:
1. Heat-Resistant Materials:
Opt for outdoor furniture made from heat-resistant materials such as aluminum, wrought iron, or teak. These materials have the ability to withstand high temperatures without warping or deteriorating.
2. UV-Resistant Fabrics:
Choose outdoor furniture with UV-resistant fabrics for cushions and upholstery. These fabrics are designed to resist fading and damage from prolonged sun exposure.
3. Breathable Fabrics:
In hot climates, it’s essential to choose outdoor furniture with breathable fabrics that allow for air circulation. Look for materials like mesh, quick-drying fabrics, or open-weave designs that promote airflow and help keep you cool.
4. Light Colors:
Light-colored outdoor furniture tends to reflect sunlight rather than absorb it, helping to keep the furniture and seating surfaces cooler. Opt for furniture in neutral or light shades to minimize heat absorption.
5. Shade Options:
Consider outdoor furniture that incorporates built-in shade options. Look for features like umbrellas, canopies, or pergolas that provide shade and protection from direct sunlight.
6. Ventilation and Airflow:
Choose outdoor furniture designs that facilitate ventilation and airflow. Look for slatted designs or furniture with open weaves that allow air to circulate freely, reducing heat buildup.
7. Portable and Versatile:
In hot climates, it can be beneficial to have furniture that is portable and versatile. Look for lightweight pieces that are easy to move and rearrange to take advantage of shade or breeze as the day progresses.
8. Storage Options:
Consider outdoor furniture that offers storage options. This can include built-in storage compartments or furniture that can be easily disassembled and stored during extreme weather conditions or extended periods of non-use.
9. Regular Maintenance:
Proper maintenance is crucial for outdoor furniture in hot and sunny climates. Regularly clean and protect the furniture according to the manufacturer’s instructions to prolong its lifespan and preserve its appearance.
By considering these recommendations, you can select outdoor furniture that is well-suited to hot and sunny climates, providing both comfort and durability in the face of intense heat and sun exposure.
Are there any DIY projects for building custom outdoor furniture pieces?
Yes, there are plenty of DIY projects available for building custom outdoor furniture pieces. If you enjoy woodworking and crafting, creating your own outdoor furniture can be a rewarding and cost-effective option. Here are a few DIY project ideas for building custom outdoor furniture:
1. Adirondack Chairs: Adirondack chairs are classic and comfortable outdoor seating options. There are numerous plans and tutorials available online that provide step-by-step instructions for building Adirondack chairs from scratch. You can customize the design, size, and finish to match your outdoor aesthetic.
2. Pallet Furniture: Repurposing wooden pallets is a popular DIY trend for creating outdoor furniture. With pallets, you can build various pieces like benches, sofas, coffee tables, and even vertical gardens. Look for pallet furniture plans and tutorials that provide guidance on dismantling and assembling pallets into functional and stylish furniture pieces.
3. Outdoor Dining Table: Building your own outdoor dining table allows you to create a custom piece that fits your space and style preferences. You can choose from various materials such as reclaimed wood, cedar, or treated lumber. Look for plans that provide detailed instructions on construction techniques, sizing, and finishing options.
4. Hammock Stand: If you enjoy lounging in a hammock, consider building a hammock stand. This DIY project typically involves working with wood or metal to create a sturdy and stable structure to hang your hammock. Plans and tutorials are available to guide you through the construction process.
5. Outdoor Bar Cart: Building an outdoor bar cart can be a fun and practical DIY project. You can construct a mobile cart with storage for drinks, glasses, and other bar essentials. Look for plans that include details on materials, measurements, and assembly instructions.
6. Outdoor Bench: Building a bench for your outdoor space provides additional seating and can be a versatile piece of furniture. You can create a simple or intricate design based on your skill level and preferences. Look for bench plans that provide guidance on dimensions, joinery techniques, and finishing.
7. Planters and Trellises: DIY planters and trellises can add both functionality and beauty to your outdoor space. You can build custom-sized planters to fit specific areas or construct trellises to support climbing plants. Plans and tutorials are available for different styles and materials.
When undertaking any DIY project, it’s important to prioritize safety. Ensure you have the necessary tools, materials, and skills for the project. Follow the instructions carefully and take proper safety precautions, such as wearing protective gear and working in a well-ventilated area.
Where can I find affordable outdoor furniture sets for my patio or deck?
If you’re looking for affordable outdoor furniture sets for your patio or deck, there are several places where you can find good deals. Here are some options to consider:
1. Online Retailers: Online retailers offer a wide range of options and often provide competitive prices. Websites such as Amazon, Wayfair, Overstock, and Walmart have dedicated sections for outdoor furniture where you can find affordable sets. Take advantage of online sales, discounts, and customer reviews to make informed purchasing decisions.
2. Local Furniture Stores: Check your local furniture stores or home improvement stores for outdoor furniture sales and clearance events. These stores often offer seasonal discounts or promotions, especially during the off-season. Visiting physical stores allows you to see and test the furniture in person before making a purchase.
3. Discount Stores: Discount stores, such as IKEA, Target, or Big Lots, frequently offer affordable outdoor furniture sets. These stores often have budget-friendly options without compromising on quality. Keep an eye on their outdoor furniture sections or sign up for their newsletters to stay informed about sales and special offers.
4. Secondhand Marketplaces: Consider exploring secondhand marketplaces like Craigslist, Facebook Marketplace, or local classified ads. Many people sell their used outdoor furniture at affordable prices, and you may find great deals on sets that are still in good condition. Be sure to inspect the furniture carefully and negotiate the price if necessary.
5. Garage Sales and Estate Sales: Garage sales and estate sales can be treasure troves for finding affordable outdoor furniture. Keep an eye out for local listings or signs in your neighborhood. While the selection may vary, you might stumble upon high-quality furniture sets at significantly discounted prices.
6. Outdoor Furniture Outlets: Outdoor furniture outlets or clearance centers often offer discounted prices on last season’s models or discontinued items. These outlets can be a great option for finding affordable outdoor furniture sets that still meet your needs and preferences.
Remember to compare prices, quality, and reviews before making a purchase. Additionally, consider the durability, materials, and maintenance requirements of the furniture to ensure you’re getting a good value for your money.
editor by CX 2023-11-08
China wholesaler Modern Simple Hotel Luxury Garden Home Outdoor Furniture Metal Legs Tube Velvet Fabric Leisure Dining Chair vacuum pump booster
Product Description
Product Description
| Product name | Simple Hotel Luxury Design Furniture Metal Legs Velvet Fabric Leisure Dining Chair |
| Model NO. | DC-1571 |
| Size(cm) | 880*585*475mm |
| Material | Fabric |
| Feature | Modern |
| Usage Scenarios | Home |
| Delivery time | Trial order lead time:10-15days. |
| Formal order lead time:15-25days. | |
| Payment terms | T/T or L/C, 30% deposit before production, the balance should be paid before delivery |
| Loading port | ZheJiang ,China |
Detailed Photos
Certifications
Company Profile
SENPAI FURNITURE CO.,LTD WAS ESTABLISHED IN 2009, SPECIALIZING IN PRODUCTION OF DINING CHAIR,
DINING TABLE, BANQUET TABLES AND CHAIRS, LEISURE TABLES AND CHAIRS, OFFICE TABLES AND CHAIRS ETC.
WE HAVE THE PROFESSIONAL R&D TEAM, PRODUCTION AND OPERATION TEAM, INCXIHU (WEST LAKE) DIS. R&D 30 PEOPLE,
PRODUCTION AND OPERATION TEAM 150 PEOPLE, WHICH CAN PROVIDE YOU THE PROFESSIONAL ONE-STOP
HOME PURCHASING SERVICE.
THE COMPANY IS 80 KM. AWAY FROM CAPITOL ZheJiang AND 60KM. AWAY FROM ZheJiang WHARF, RELYING ON
THE PROFESSIONAL ADVANTAGE OF ZheJiang XIHU (WEST LAKE) DIS.G PORT, OUR PRODUCTS ARE EXPORTED TO MORE THAN
60 COUNTRIES AND REGIONS SUCH AS EUROPE, AMERICAS, SOUTHEAST ASIA, THE UNITED STATES,
THE UNITED KINGDOM, CANADA, FRANCE, POLAND, WITH AN ANNUAL SALES VOLUME OF OVER
100 MILLION US DOLLARS.
WITH THE BUSINESS DEVELOPMENT IDEA OF “CUSTOMER FIRST, QUALITY FIRST”, SENPAI PROVIDES
THE BEST SERVICE AND QUALITY PRODUCTS FOR CUSTOMERS INLAND AND OVERSEAS.
WELCOME TO VISIT AND DISCUSS COOPERATION!
Production process
Packaging & Shipping
1)Usual packed in 2pcs/1ctn; 4pcs/1ctns; 6pcs/2ctns
2)Frame Package: with styrofoam paper; Hardwares in poly bags;
3)Carton: 5-layer cardboard carton
Export standard packing for loading container, no any damage happened.
1) Glass Package: Styrofoam Paper&foam sheet.
2) Frame Package: Legs wrapped with styrofoam paper, Hardwares in poly bags.
3) Carton: 5-layer cardboard carton following Stacking Test and Master Carton Drop Test
Our Advantages
- Low MOQ, we can accommodate your quantity, even if it is small.
- OEM accepted, products can be made based on your requirements.3.
- Good quality, we have very strict quality control.
- Best price, we will give you the most competitive price.
- Accurate delivery time, we will make sure the goods are delivered to you on time.
- Good service, quick response, try our best to help.
FAQ
1.How about your quality?
We have QC department, they control every process,
start from purchasing raw material to finish the goods and loading the container.
2. What is your MOQ?
Usually 200 pcs per model for chairs and 50 pcs per model for tables .
3. Will you pack the goods with assembly instruction?
Yes, we put the assembly instruction into the package.
If you still don’t know how to assemble, you may consult us.
4. If we want a sample, how much do we need to pay?
We usually charge 2 times price, and the transport fee should be paid by buyer,
we will return the extra money when you place order.
5. What about the leading time for mass production?
It depends on the order quantity and the product.
Usually our leading time is 20-30 days after order confirmed.
If you have any interest, please feel free to contact us. Thank you.
| Style: | Modern |
|---|---|
| Material: | Fabric |
| Usage: | Hotel, Home |
| Armrest: | Without Armrest |
| Color: | Yellow |
| Folded: | Unfolded |
| Samples: |
US$ 150/Piece
1 Piece(Min.Order) | |
|---|
Are there any DIY projects for building custom garden furniture pieces?
Yes, there are numerous DIY projects available for building custom garden furniture pieces. Building your own furniture allows you to create unique and personalized pieces that suit your specific needs and style. Here are a few DIY project ideas for building custom garden furniture:
1. Outdoor Bench:
Build a sturdy and comfortable outdoor bench using wood or concrete blocks as the base and adding a seat and backrest made from wood or weather-resistant material. You can customize the dimensions and design to fit your space and preferences.
2. Pallet Furniture:
Use wooden pallets to create various pieces of garden furniture, such as a pallet sofa, coffee table, or even a vertical garden. Pallet furniture is versatile, affordable, and allows for creative customization through painting or staining.
3. Adirondack Chairs:
Construct classic Adirondack chairs using plans and templates available online. These iconic chairs are comfortable and have a distinct, rustic look. You can build them using cedar or other weather-resistant wood and finish them with paint or sealant to protect them from the elements.
4. Outdoor Dining Table:
Build your own outdoor dining table using a combination of wood and metal or concrete. Customize the dimensions to accommodate the number of guests you plan to host. Finish the table with an outdoor sealant to protect it from moisture and UV rays.
5. Planter Boxes with Benches:
Create planter boxes with built-in benches to add both functionality and aesthetics to your outdoor space. Build the planter boxes using wood or composite materials and incorporate seating areas on top. This project allows you to combine seating and greenery in one piece.
6. Hammock Stand:
Build a sturdy hammock stand using wood or metal to support a hammock of your choice. Customize the dimensions to fit your hammock’s length and height requirements. Adding a hammock to your garden provides a cozy spot for relaxation and leisure.
7. Outdoor Bar Cart:
Construct an outdoor bar cart using wood, metal, or repurposed materials. Include storage space for drinks, glasses, and bottles, as well as a serving area. Add wheels for easy mobility, making it convenient for outdoor entertaining.
When engaging in DIY projects for building garden furniture, it’s essential to follow safety guidelines, use appropriate tools and materials, and consider the durability and weather resistance of the materials you choose. Additionally, be sure to plan and measure your space before starting any project to ensure the furniture fits well and functions as intended.
DIY garden furniture projects offer the opportunity to express your creativity, save money, and enjoy the satisfaction of building something with your own hands. Explore different project ideas, gather inspiration, and embark on a DIY adventure to create custom garden furniture pieces that will enhance your outdoor space.
Can garden furniture be customized to match my outdoor space and style?
Yes, garden furniture can often be customized to match your outdoor space and style. Customization options allow you to create a cohesive and personalized look that complements your overall aesthetic. Here are some ways you can customize your garden furniture:
1. Material Selection:
Choose the materials for your garden furniture based on your desired style and the existing elements in your outdoor space. Options may include wood, metal, wicker, rattan, or plastic. Each material has its own unique appearance and characteristics, allowing you to select the one that best aligns with your preferred style.
2. Finish and Color:
Customize the finish and color of your garden furniture to match your outdoor space and personal style. Wood furniture can be stained or painted in various colors to achieve the desired look. Metal furniture can be powder-coated in different shades or finishes. Wicker and rattan furniture often come in a variety of natural or synthetic fiber colors. Plastic furniture may be available in a range of vibrant or neutral tones.
3. Cushion and Upholstery Fabrics:
Consider the fabric options for cushions and upholstery to coordinate with your outdoor space and style. Choose fabrics in colors, patterns, and textures that complement the overall aesthetic. There are numerous outdoor-grade fabrics available that are designed to withstand exposure to sunlight, moisture, and other environmental factors.
4. Modular and Configurable Designs:
Opt for modular or configurable designs that allow you to customize the layout and arrangement of your garden furniture. These designs often feature individual pieces that can be rearranged to suit your specific space and needs. This flexibility enables you to create a seating arrangement that fits well within your outdoor area.
5. Accessories and Accents:
Add accessories and accents to your garden furniture to further personalize and match your outdoor space. This can include items such as decorative pillows, throws, outdoor rugs, or table centerpieces. These small details can tie together the overall style and create a cohesive look.
6. Built-in Features:
If you have specific requirements or preferences, consider customizing your garden furniture with built-in features. This could include built-in storage compartments, drink holders, or adjustable components. Built-in features can enhance the functionality and convenience of your furniture while catering to your personal needs.
7. Professional Customization:
If you have a specific vision or require intricate customization, you may consider consulting with professional furniture makers or designers. They can help bring your ideas to life, create unique pieces tailored to your outdoor space, and suggest innovative customization options based on their expertise.
When customizing your garden furniture, ensure that any modifications or additions do not compromise the structural integrity or safety of the furniture. It’s also important to consider the durability and maintenance requirements of the customizations, especially in outdoor environments.
By exploring the various customization options available and considering your personal style and outdoor space, you can create garden furniture that is unique, visually appealing, and perfectly suited to your needs.
How do I clean and maintain my garden furniture to keep it looking new?
To keep your garden furniture looking new and well-maintained, regular cleaning and proper maintenance are essential. Here are some steps you can follow to clean and maintain your garden furniture:
1. Read the Manufacturer’s Instructions:
Before cleaning your garden furniture, refer to the manufacturer’s instructions and guidelines. Different materials and finishes may require specific cleaning methods or products. Adhering to the manufacturer’s recommendations ensures that you don’t accidentally damage the furniture.
2. Remove Debris:
Start by removing any loose dirt, leaves, or debris from your furniture. Use a soft brush or a cloth to gently sweep away the debris. Pay attention to crevices and corners where dirt may accumulate.
3. Clean with Mild Soap and Water:
For most types of garden furniture, a solution of mild soap and water is sufficient for cleaning. Mix a small amount of mild dish soap or a gentle outdoor furniture cleaner with water. Use a sponge or a soft cloth to clean the surfaces of the furniture, including the frames, tabletops, and seating areas. Rinse thoroughly with clean water afterward.
4. Address Stains Promptly:
If you notice any stains on your furniture, address them promptly. Blot liquid stains with a clean cloth and mild soap solution. For tougher stains, you may need to use a specialized cleaner recommended for the specific material of your furniture. Follow the instructions on the cleaner and test it on a small, inconspicuous area before applying it to the entire surface.
5. Treat Wooden Furniture:
If you have wooden garden furniture, additional care is required. Regularly inspect the wood for signs of cracking, peeling, or discoloration. If necessary, sand the surface lightly and apply a protective finish or outdoor furniture oil to maintain its appearance and protect it from moisture.
6. Maintain Metal Furniture:
Metal garden furniture may require occasional maintenance to prevent rust or corrosion. Check for any signs of rust and remove it using a wire brush or sandpaper. Apply a rust-resistant paint or a protective spray to any exposed metal surfaces.
7. Store or Cover:
When not in use, consider storing your garden furniture indoors or covering it with weatherproof furniture covers. This protects the furniture from the elements and extends its lifespan. Ensure that the furniture is clean and dry before covering or storing it to prevent the growth of mold or mildew.
8. Regularly Inspect and Repair:
Periodically inspect your garden furniture for any signs of wear, loose screws, or damaged parts. Tighten any loose screws or bolts and make necessary repairs promptly to prevent further damage.
By following these cleaning and maintenance practices, you can keep your garden furniture looking new and prolong its lifespan. Regular care and attention will help preserve its appearance and functionality for years to come.
editor by CX 2023-11-08
China Hot selling Garden Restaurant Furniture Armchair CHINAMFG Frame Dining Chair Quality Wholesale vacuum pump connector
Product Description
Product Description
Product Parameters
| Product Name | Palm Armchair-Chocolate |
| Item Number | AS1083AR TBA |
| Overall Size | W53xD57xH43/88cm |
| Material | Dia30xT1.5mm,aluminium tube+PE wicker |
| Finishing | with flat wicker weaving, with inox plug |
| Usage | Outdoor Dining Room Garden Set for people leisure,Weather resistant frame is durable for a long time usage |
| Seat&back | UV resistant flat PE wicker |
| Warranty | 2~3 years (Aluminum Frame at least 5 years quality warranty) |
Product Features
Company Profile
Apex Horeca
As a supplier of commercial / cantract / event & banquet furniture, with years of development, has grown into a leading and reliable source of quality outdoor furniture to the hospitality industry as well as bespoke furniture and family homes around the world.
Not only will you get the best prices for the best quality up-to-date outdoor furniture, you’ll also find our widest variety of outdoor furniture, help to create an inviting and comfortable atmosphere displaying much character and ambiance for your very own garden/resort/hotel/restaurant/cafe.
Our collections are made with quality materials, and can withstand all the harsh weather conditions and climate. Whether you would like 1 chair to laze on reading paper while sipping on a cappuccino in your garden/balcony or have a hotel/restaurant/cafe project in hand that needs outdoor furniture, welcome to come to us!
We ensure that you will be delighted with your choice!
Projects
Exhibition Record
Our Advantages
FAQ
1. What is your MOQ?
Depends on items, some are 50pc, some are 20pc.
2. What is the loading port?
HangZhou, HangZhou.
3. What is your payment term?
T/T or L/C.
4. What is your delivery time?
About 20-30 days after 30% deposit received. Stocked items will be faster.
5. What are your warranty terms?
24 month
6.How to control your quality?
We have built a professional technical team for quality control and innovation development. With the powerful management and QA & QC team.
7. What’s materials can we offer?
CHINAMFG ;stainless steel ;cast iron;wood
8. Did you have stock?
Depend on what products you need. we have stock in some hot selling products.
9. Where are our main export market?
Our main market includes Unite State,Europe
10. How we arrange shipment?
We do business with foreign country for more than 10 years, so we keep a long well our forworders.
11.Can i use my own fabric or other materials?
Yes, please send the materials to our factory before the production. However, we are not responsible for the international delivery cost or any tax.
12.How can I make a change or cancel my order?
Making a change to your order is only allowed before production, Once your order has been produced, the order cannot be canceled or returned.
| Material: | Aluminium Tube+PE Wicker |
|---|---|
| Style: | Morden |
| Folded: | Unfolded |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the ideal cleaning and maintenance practices for aluminum chairs?
Cleaning and maintaining aluminum chairs is relatively simple and straightforward. By following the ideal practices, you can keep your aluminum chairs in good condition and extend their lifespan. Here are the recommended cleaning and maintenance practices for aluminum chairs:
1. Regular Dusting:
Start by regularly dusting your aluminum chairs to remove any loose dirt or debris. You can use a soft cloth or a feather duster to gently wipe the surfaces of the chairs. Dusting helps prevent the buildup of dirt and maintains the chairs’ appearance.
2. Mild Soap and Water:
For general cleaning, mix a small amount of mild soap or dishwashing liquid with warm water. Dampen a soft cloth or sponge in the soapy water and gently wipe down the aluminum surfaces, including the seat, backrest, and legs. Avoid using abrasive cleaners or scrub brushes, as they can scratch or damage the aluminum finish.
3. Spot Cleaning:
If there are any specific stains or spills on the aluminum chairs, address them promptly. Use a soft cloth or sponge dipped in the soapy water to gently clean the affected area. Rinse the cloth or sponge thoroughly and wipe away any soap residue. Dry the area with a clean towel to prevent water spots.
4. Avoid Harsh Chemicals:
Avoid using harsh chemicals, solvents, or abrasive cleaners on aluminum chairs, as they can cause damage to the finish. This includes cleaners containing bleach, ammonia, or acidic ingredients. Stick to mild soap and water solutions for regular cleaning.
5. Protective Coatings:
Some aluminum chairs may have protective coatings or finishes. Over time, these coatings can wear off or become damaged. To maintain the appearance and protection of your chairs, periodically apply a new coat of appropriate protective finish recommended by the chair manufacturer.
6. Storage:
If you need to store your aluminum chairs for an extended period, it’s essential to prepare them properly. Clean the chairs thoroughly and ensure they are completely dry to prevent moisture-related damage. Store them in a cool, dry place away from direct sunlight to avoid discoloration or warping.
7. Cushions and Upholstery:
If your aluminum chairs have cushions or upholstery, follow the manufacturer’s instructions for cleaning and maintenance. Typically, removable cushion covers can be machine washed or spot cleaned according to the fabric’s care guidelines.
8. Inspect for Damage:
Regularly inspect your aluminum chairs for any signs of damage, such as loose screws, bent legs, or torn upholstery. Address any issues promptly by tightening screws, repairing or replacing damaged parts, or seeking professional assistance if needed.
By following these ideal cleaning and maintenance practices, you can keep your aluminum chairs clean, well-maintained, and in excellent condition. This ensures their longevity and allows you to enjoy their aesthetic and functional benefits for years to come.
Can aluminum chairs be used for both dining and relaxation purposes?
Yes, aluminum chairs can be used for both dining and relaxation purposes. Aluminum chairs are versatile and adaptable, making them suitable for various settings and activities. Here’s a detailed explanation:
1. Dining:
Aluminum chairs are commonly used for outdoor dining spaces. They are lightweight, making them easy to move and arrange around a dining table. Aluminum chairs can be designed with different styles, including traditional, modern, or contemporary, allowing you to find chairs that complement your dining area’s aesthetic. Additionally, aluminum’s durability and weather resistance make it an ideal choice for outdoor dining, as it can withstand exposure to sun, rain, and other environmental factors.
2. Relaxation:
Aluminum chairs are also suitable for relaxation purposes. Their lightweight nature makes them portable and easy to reposition, allowing you to create a comfortable seating arrangement in various areas of your outdoor space. Aluminum chairs can be paired with cushions or padded seats to enhance comfort during relaxation. Whether you want to sit back and read a book, enjoy a cup of coffee, or bask in the sun, aluminum chairs offer a convenient and versatile seating option.
3. Multipurpose Use:
One of the advantages of aluminum chairs is their ability to serve multiple purposes. They can be used for both dining and relaxation, providing flexibility in how you utilize your outdoor space. For example, during mealtime, aluminum chairs can be arranged around a dining table for comfortable dining. Afterward, you can rearrange the chairs to create a more relaxed seating area for lounging or socializing.
4. Design Variety:
Aluminum chairs come in a wide range of designs, sizes, and styles, allowing you to find chairs that cater to your specific needs and preferences. Whether you prefer a more formal dining setting or a casual lounging area, there are aluminum chairs available to suit your desired aesthetic. You can choose from different chair designs, such as armchairs, sling chairs, or stackable chairs, depending on your intended use and space constraints.
It’s worth noting that while aluminum chairs can be used for both dining and relaxation, the specific comfort level may vary depending on the chair design and the addition of cushions or padding. For extended periods of relaxation, you may prefer chairs with added cushioning or loungers specifically designed for comfort. Additionally, considering the ergonomics of the chairs can contribute to a more comfortable seating experience.
Overall, aluminum chairs offer versatility, durability, and style, making them suitable for both dining and relaxation purposes in various outdoor settings.
What are the advantages of using powder-coated aluminum for chair frames?
Using powder-coated aluminum for chair frames offers several advantages. Powder coating is a popular finishing technique that involves applying a dry powdered paint onto the aluminum surface, which is then cured under heat to create a durable and attractive finish. Here are the advantages of using powder-coated aluminum for chair frames:
1. Durability: Powder coating creates a hard and resilient finish that is highly resistant to chipping, scratching, and fading. This durability makes powder-coated aluminum chair frames suitable for both indoor and outdoor use, as they can withstand frequent use, exposure to the elements, and general wear and tear.
2. Corrosion Resistance: Aluminum itself is naturally resistant to corrosion, but the powder coating adds an additional layer of protection. The powder coating acts as a barrier, preventing moisture and chemicals from reaching the aluminum surface and causing corrosion. This makes powder-coated aluminum chair frames ideal for outdoor environments, where they are exposed to rain, humidity, and other corrosive elements.
3. Aesthetics: Powder-coated aluminum chair frames offer a wide range of color options and finishes, allowing for customization to suit different design preferences. The powder coating process ensures a smooth and even finish, enhancing the overall appearance of the chair frames. The color and finish options also allow for coordination with other elements of the space, such as cushions or surrounding furniture.
4. Easy Maintenance: Powder-coated aluminum chair frames are relatively easy to clean and maintain. The smooth and non-porous surface resists dirt, stains, and moisture, making them easier to wipe clean with mild soap and water. They do not require regular painting or sealing like other materials, simplifying the maintenance process.
5. Environmentally Friendly: Powder coating is considered an environmentally friendly finishing option. The powder coating process produces minimal waste, as any overspray can be collected and reused. Additionally, the powder coating itself is free of volatile organic compounds (VOCs) and hazardous air pollutants (HAPs), making it a safer and more sustainable choice compared to traditional liquid paints.
6. Uniform Coverage: Powder coating provides a uniform and consistent finish on the chair frames. The dry powder adheres evenly to the aluminum surface, eliminating the risk of drips, runs, or uneven coverage often associated with liquid paints. This results in a professional and aesthetically pleasing appearance.
Overall, using powder-coated aluminum for chair frames combines the inherent benefits of aluminum, such as lightweight and corrosion resistance, with the added advantages of durability, customizable aesthetics, easy maintenance, and environmental friendliness. These factors make powder-coated aluminum an excellent choice for chair frames in various settings, including residential, commercial, and outdoor spaces.
editor by CX 2023-11-08
China Best Sales CHINAMFG & Metal &Ceramic CHINAMFG Wooden Case Unit Kj-916 Dental Chair vacuum pump booster
Product Description
Best Sell Dental Chair with Lamp Reflector from China
KJ-916
Using the material of full cast aluminum , the cover base on single shot shaping technique with streamline design that the unit is very stable.
The modelling effect feeling stronger and advanced, large unit box design, not only looks great, but also easier to daily maintain.
Hand piece tube use silicon gel , it is not easy to aging;the plastic tube from ZheJiang XINTONGLI , durable ;The ceramic spittoon easy to clean.
Tool tray:
-LCD display ,intelligent key-touch control system with 9 memories ,wide and big handpiece tool holder. top-mounted and down-tool tray for selection.
-The cover of KJ-916 base on single shot shaping technique ,with the streamlined design ,make the unit stable.
Large rotable unit box is easy for doctor to maintain ,this design with tissue box and rotatable glass tray.
Standard Equipment:
| High speed handpiece connector | 2sets |
| Low speed handpiece connector | 1set |
| 3-way syringe (cold and hot) | 2PCS |
| Operation lamp | 1set |
| Built-out ground box | 1set |
| Saliva ejector (strong and weak): | 1set |
| Automatic cup filler | 1set |
| Movable assistant device | 1set |
| Built-out water purified system | 1set |
| 24V D.C noiseless motor | 2PCS |
| hand-made sewed ultra-fiber leather | 1set |
| Doctor’s stool | 1set |
| Movable ceramic spittoon | 1Set |
Technical parameters:
| Power supply | 220V 50Hz 2.5A(110V 60HZ 5A) |
| Input power | 350VA |
| Water pressure | 0.2MPa-0.4MPa |
| Air pressure | 0.5MPa-0.6MPa |
Options:
| Dental operating light with sensor( or LED operating light) |
| Top-mounted instrument tray |
| High speed hand piece |
| Low speed hand piece |
| Ultrasonic scaler |
| LED cure light |
| Leather cushion |
| Air compressor |
| Endoscopic system |
Packaging&delivery:
Packing size :1.43*1*1.25m=16pcs in 20’feet container
Delivery:Within 7-14 days after payment confirmed
Our Advantage:
-Rich experience & Specialize in dental industry for 6 years.
-Located in the South China International CHINAMFG Devices Industry Center brings absolute advantage of purchasing.
-Own a complete supply chain, the products we choose have strictly inspect, select carefully, ensure that all of them come from the excellent manufacturer.
-Familiarity with import and export trade rules, make sure the clients can receive the goods safely.
-To meet the clients’ need, we supply all kinds of dental products, including dental equipment and material.
-Our price has the absolute advantage, because of the country of origin.
Exhibition:
Further Support:
-Take customers to visit the local factory service. (compensable service)
-Dental industry information service.
-Product searching service.
-Free customized procurement plan.
About After-sale Service:
-1 year warranty
– Return or exchange Policy
If you have any requirements , welcome to contact us!
LORA
| Interface: | 4 Holes |
|---|---|
| Teeth Whitening Method: | Laser Whitening |
| Applicable Departments: | Oral Surgery |
| Certification: | ISO, CE |
| Type: | Dental Unit |
| Material: | Aluminum & Metal &Ceramic |
How do aluminum chairs enhance the overall aesthetics of indoor and outdoor spaces?
Aluminum chairs have the ability to enhance the overall aesthetics of both indoor and outdoor spaces. Their design, material properties, and versatility contribute to creating an appealing and cohesive environment. Here’s how aluminum chairs enhance the aesthetics of indoor and outdoor spaces:
1. Sleek and Modern Design:
Aluminum chairs often feature sleek and modern designs that add a contemporary touch to any space. They have clean lines, smooth surfaces, and minimalist profiles that create a visually appealing look. These chairs can complement a variety of interior design styles, from modern and industrial to minimalist and Scandinavian, adding a touch of sophistication and elegance to indoor spaces.
2. Range of Styles and Finishes:
Aluminum chairs come in a wide range of styles and finishes, allowing for customization and coordination with the existing decor. Whether you prefer a polished metallic look, a matte finish, or even vibrant colors, there are aluminum chair options to suit various design preferences. The availability of different styles and finishes enables you to choose chairs that seamlessly blend with the overall aesthetic of the space.
3. Visual Lightness:
Aluminum chairs have a visual lightness due to their lightweight nature and slender profiles. This lightness creates an open and airy atmosphere, making the space feel more spacious and inviting. In indoor settings, aluminum chairs can help create an uncluttered and modern ambiance. Outdoors, the visual lightness of aluminum chairs allows the natural surroundings to take focus, enhancing the overall aesthetic appeal of the outdoor space.
4. Contrast and Complement:
Aluminum chairs can be used to create visual contrast or complement other elements in the space. For instance, in indoor settings with wooden floors or tables, the sleek metallic finish of aluminum chairs can provide an interesting contrast that adds visual interest. Alternatively, aluminum chairs can be chosen to match or complement other metallic accents or materials present in the space, creating a cohesive and harmonious design scheme.
5. Indoor-Outdoor Continuity:
Aluminum chairs are versatile and can seamlessly transition between indoor and outdoor spaces. Using the same or similar aluminum chairs in both areas creates a sense of continuity and connection. This continuity enhances the overall aesthetic appeal of the space, as the design elements flow cohesively from one area to another. It also allows for a seamless transition for users, maintaining a consistent visual language throughout the environment.
6. Weather Resistance:
For outdoor spaces, aluminum chairs offer practical benefits in addition to aesthetics. Their weather-resistant properties make them suitable for use in various climates and outdoor environments. They can withstand exposure to sunlight, rain, and moisture without significant damage or color fading. The ability of aluminum chairs to maintain their appearance and quality over time contributes to the long-term aesthetics of outdoor spaces.
By incorporating aluminum chairs into indoor and outdoor spaces, you can enhance the overall aesthetics by introducing sleek and modern designs, coordinating styles and finishes, creating visual lightness, and achieving continuity and contrast. The versatility and weather-resistant properties of aluminum chairs further contribute to the long-lasting appeal of the spaces they occupy.
How can I maintain and care for my aluminum chairs to extend their lifespan?
To extend the lifespan of your aluminum chairs and keep them looking their best, it’s important to follow proper maintenance and care practices. Here are some tips to help you maintain and care for your aluminum chairs:
1. Regular Cleaning:
Clean your aluminum chairs regularly to remove dirt, dust, and other debris that can accumulate on the surface. Use a mild soap or detergent mixed with water and a soft cloth or sponge to gently clean the chairs. Avoid using abrasive cleaners or brushes that can scratch the aluminum surface.
2. Remove Stains:
If your aluminum chairs develop stains, such as from food or beverages, clean them as soon as possible to prevent the stains from setting in. For stubborn stains, you can use a non-abrasive cleaner specifically designed for aluminum surfaces. Follow the manufacturer’s instructions and rinse the chairs thoroughly after cleaning.
3. Protective Wax or Clear Coat:
Consider applying a protective wax or clear coat to the aluminum chairs to provide an additional layer of protection against the elements. These products can help maintain the chair’s finish and provide resistance to UV rays, moisture, and other environmental factors. Follow the manufacturer’s instructions when applying the protective coating.
4. Avoid Harsh Chemicals:
Avoid using harsh chemicals, solvents, or abrasive cleaners on your aluminum chairs, as they can damage the finish and surface of the chairs. This includes cleaners containing bleach, ammonia, or acidic ingredients. Stick to mild soaps or cleaners specifically formulated for use on aluminum surfaces.
5. Store Properly:
If you plan to store your aluminum chairs during the off-season or in inclement weather, it’s best to store them in a dry and well-ventilated area. Before storing, ensure the chairs are clean and completely dry to prevent moisture buildup, which can lead to corrosion. If possible, cover the chairs with a protective cover to shield them from dust and debris.
6. Inspect for Damage:
Regularly inspect your aluminum chairs for any signs of damage, such as dents, scratches, or loose joints. Promptly address any issues to prevent them from worsening. For minor scratches, you can use touch-up paint specifically designed for aluminum. For more significant damage or structural issues, consult the manufacturer or a professional for appropriate repair options.
By following these maintenance and care tips, you can help extend the lifespan of your aluminum chairs and keep them in excellent condition. It’s also important to refer to the manufacturer’s guidelines and recommendations for specific care instructions, as different chair designs and finishes may have specific requirements.
What are the benefits of using aluminum chairs for indoor and outdoor seating?
Using aluminum chairs for indoor and outdoor seating provides several benefits. Here’s a detailed explanation:
1. Lightweight and Portable: Aluminum chairs are lightweight, making them easy to move and transport. Whether you need to rearrange seating in your living room or set up additional seating for a gathering in your backyard, the lightweight nature of aluminum chairs allows for effortless mobility.
2. Durability: Aluminum chairs are known for their durability. The material is resistant to rust, corrosion, and decay, ensuring that the chairs can withstand regular use and exposure to the elements. This durability makes aluminum chairs a long-lasting seating option for both indoor and outdoor environments.
3. Weather Resistance: Aluminum is highly resistant to outdoor elements, such as rain, sunlight, and temperature fluctuations. This makes aluminum chairs suitable for outdoor seating areas, such as patios or gardens, where they can withstand various weather conditions without deteriorating or losing their structural integrity.
4. Easy Maintenance: Aluminum chairs are relatively low-maintenance. They can be easily cleaned with a damp cloth or mild soap, and they do not require sealing or staining like some other seating materials. This ease of maintenance saves time and effort, allowing you to focus on enjoying the seating areas rather than spending excessive time on upkeep.
5. Variety of Styles: Aluminum chairs come in a wide range of styles, designs, and finishes, allowing you to find chairs that match your indoor or outdoor decor. Whether you prefer modern and sleek designs, classic and traditional styles, or something in between, there are aluminum chairs available to suit your aesthetic preferences.
6. Comfort: Many aluminum chairs are designed with comfort in mind. They often feature ergonomic shapes, contoured seats, and supportive backrests. Some chairs may also have cushions or padding for added comfort during extended sitting periods. The comfort provided by aluminum chairs enhances the overall seating experience, whether indoors or outdoors.
7. Space Efficiency: Aluminum chairs are often designed with space efficiency in mind. They may feature stackable, folding, or nesting capabilities, allowing you to save space when the chairs are not in use. This is particularly beneficial in areas with limited space or when you need to store the chairs during certain times of the year.
8. Versatility: Aluminum chairs are versatile and can be used in various indoor and outdoor settings. Whether it’s a dining room, kitchen, patio, garden, or terrace, aluminum chairs can adapt to different environments and complement different styles of decor. This versatility makes them a practical seating option for a wide range of spaces.
9. Affordability: Aluminum chairs are often more affordable compared to other seating materials, such as wood or metal. This makes them a cost-effective choice, whether you need seating for a small gathering or outfitting a larger space. The affordability of aluminum chairs allows you to stay within your budget without compromising on quality or style.
10. Sustainability: Aluminum is a recyclable material, and using aluminum chairs promotes sustainability. When the chairs reach the end of their lifecycle, they can be recycled and repurposed rather than ending up in landfills. Choosing aluminum chairs for indoor and outdoor seating aligns with environmentally conscious practices.
By using aluminum chairs for both indoor and outdoor seating, you can benefit from their lightweight and portable nature, durability, weather resistance, easy maintenance, variety of styles, comfort, space efficiency, versatility, affordability, and sustainability. These chairs provide practical and functional seating solutions that enhance the overall comfort and aesthetics of your living spaces.
editor by CX 2023-11-08
China Professional Made in China CHINAMFG Bk175kw-8f Electric Rotary Screw Air Compressor wholesaler
Product Description
BK series new screw air compressor new-generation low-consumption and high-efficiency motor;Large starting torque, insulation class F, protection class IP54;SKF bearings, low noise and long life;With a refueling device, it can be refueled without stopping.
Product Description
Yin-Yang Rotor Compression System
Better sealing, smaller leakage channel will produce high-efficiency roller sliding film to reduce heat of compression, and gas production is improved by 10%-15%
Built-in oil and gas separation design
Adopt a built-in oil separation setting to ensure the oil and gas separation effect and reduce fuel consumption
·High filtration level and low flow resistance
·Good noise reduction and mute effect
· Oil and gas separation, high-temperature resistance, high-pressure resistance – reduce the oil content of the exhaust
·Clean exhaust to ensure clean gas
Timely Smart Control Panel
·Using a user-friendly interface to prompt operation, clear at a glance, real-time monitoring of information, providing important information alarm, storage, and query functions
Precision oil filter
·Use high-density filter paper to filter oil
· Completely filter out lubricating oil
Low-consumption and high-efficiency motor, large starting torque
·Insulation class F, protection class IP23.
·Built-in refueling device, can refuel without stopping.
Cooling copper pipe
The radiator made of high-quality copper tubes can make the heat generated by the condensation of the machine quickly Dissipate, maintain the internal temperature
oil pipeline
·Excellent material
·Stable oil delivery without clogging
The system adopts the step-less adjustment of the displacement of 0-100. When the air consumption is reduced, the exhaust volume is also reduced, and the current of the motor is also reduced at the same time; when the air is not used, the air compressor runs empty, and the air compressor is automatically stopped for a long time. When the gas consumption increases, resume the heavy vehicle. Excellent energy-saving effect.
good environmental adaptability
The extraordinary cooling system design is especially suitable for Asia’s high temperature and high humidity environments. The excellent vibration isolation technology and noise reduction measures make the installation of CHINAMFG screw air compressors not require special foundations. As long as a small space for ventilation and maintenance is left, your compressor can be installed well.
Design features of screw rotor profile:
1. Fully realize “surface-to-surface” meshing, thereby helping to form a hydrodynamic lubricating film, reducing lateral leakage through the contact belt, improving compressor efficiency; and improving rotor processing and inspection performance.
2. Adopt the design idea of “large rotor, large bearing, low speed”, the speed is 3050 lower than other brands, which can reduce noise and vibration, reduce exhaust temperature, improve rotor rigidity, prolong service life, and reduce the carbonization of impurities and oil animal sensitivity.
3. The power range is 4355KW, of which 18.5250KW are directly connected without a gearbox, 200KW and 250KW are directly connected with 4-pole motors, and the speed is as low as 1480 rpm
Product Parameters
|
Screw group |
5: 6 Gear rotor |
|
|
Compression method |
Continuous, single stage |
|
|
Compressed air outlet pressure |
8MPa |
|
|
Compressed air outlet temperature |
Air-cooled |
|
|
Compressed air outlet temperature |
10ºC~15ºC higher than the ambient temperature |
|
|
Volume of Lubricating Oil |
About 7.5 liters |
|
|
Motor speed |
N=2930r/min |
|
|
Rated power |
175kw |
|
|
Displacement |
1.3MPa |
24m³/min |
|
Weight |
1630kg |
|
|
Upper air temperature |
45ºC |
|
|
Lower limit of air temperature |
0ºC |
|
|
Fuel consumption |
Exhaust oil content is less than 3PPM |
|
|
Noise level |
72dB(A) |
|
|
Dimensions (length×width×height) (mm) |
1200x800x1120 |
|
|
Model |
Working Pressure |
Capacity |
Motor Power |
Connector |
Weight |
Noise |
Dimension |
|
Bar |
m³/min |
kw |
kg |
dB(A) |
mm |
||
|
BMVF7.5G |
0.65-1.0 |
1.0-1.25 |
7.5 |
G3/4 |
200 |
72 |
800*510*800 |
| BMVF11G |
0.65-1.0 |
1.5-1.85 |
11 |
G1
|
260 |
73 |
1000*670*1090 |
| BMVF15G | 0.65-1.0 |
2.05-2.35 |
15 |
280 |
73 |
1000*670*1090 |
|
|
BMVF22G |
0.65-1.0 |
2.95-3.95 |
22 |
390 |
74 |
1200*800*1120 |
|
| BMVF37G | 0.65-1.0 |
5.05-6.35 |
37 |
600 |
76 |
1340*850*1300 |
|
|
BMVF45G |
0.65-1.0 |
6.45-8.2 |
45 |
800 |
78 |
1480*1030*1365 |
|
| BMVF55G | 0.65-1.0 |
8.2-9.85 |
55 |
810 |
80 |
||
| BMVF75 | 0.65-1.0 |
10.5-13.1 |
75 |
G2 |
1280 |
81 |
1800*1190*1710 |
| BMVF90 | 0.65-1.0 |
12.5-15.5 |
90 |
1300 |
81 |
||
| BMVF110 | 0.65-0.8 |
22 |
110 |
DN65 |
1850 |
82 |
2700*1230*1730 |
| BMVF132 | 0.65-0.8 |
24 |
132 |
2270 |
82 |
| Model | Working Pressure | Displacement | Motor Power | Exhaust interface | Weight | Noise | Dimension |
| Bar | m3/min | kw | kg | dB(A) | mm | ||
| BK7.5-8G | 8 | 1.2 | 7.5 | G1 | 200 | 70 | 800*620*800 |
| BK7.5-10 | 10 | 1 | 7.5 | G3/4 | 200 | 72 | 720*700*1000 |
| BK7.5-13 | 13 | 0.8 | 7.5 | G3/4 | 200 | 72 | 720*700*1000 |
| BK11-8G | 8 | 1.7 | 11 | G1 | 300 | 72 | 1000*670*1090 |
| BK11-10 | 10 | 1.5 | 11 | G1 | 290 | 72 | 700*670*1250 |
| BK11-13 | 13 | 1.2 | 11 | G1 | 290 | 72 | 700*670*1250 |
| BK15-8G | 8 | 2.4 | 15 | G1 | 280 | 73 | 1000*670*1090 |
| BK15-10 | 10 | 2.2 | 15 | G1 | 290 | 73 | 700*670*1250 |
| BK15-13 | 13 | 1.7 | 15 | G1 | 290 | 73 | 700*670*1250 |
| BK18-8 | 8 | 3 | 18.5 | G1 | 500 | 74 | 1080*880*1235 |
| BK18-10 | 10 | 2.7 | 18.5 | G1 | 500 | 74 | 1080*880*1235 |
| BK18-13 | 13 | 2.3 | 18.5 | G1 | 500 | 74 | 1080*880*1235 |
| BK22-8ZG | 8 | 3.6 | 22 | G1 | 380 | 74 | 1200*800*1100 |
| BK22-10 | 10 | 3.2 | 22 | G1 | 540 | 74 | 1080*880*1235 |
| BK22-13 | 13 | 2.7 | 22 | G1 | 540 | 74 | 1080*880*1235 |
| BK30-8 | 8 | 5 | 30 | G1 1/2 | 650 | 75 | 1120*930*1290 |
| BK30-10 | 10 | 4.4 | 30 | G1 1/2 | 650 | 75 | 1120*930*1290 |
| BK30-13 | 13 | 3.6 | 30 | G1 1/2 | 650 | 75 | 1120*930*1290 |
| BK37-8ZG | 8 | 6 | 37 | G1 1/2 | 740 | 76 | 1530*900*1230 |
| BK37-10 | 10 | 5.5 | 37 | G1 1/2 | 730 | 76 | 1240*1030*1435 |
| BK37-13 | 13 | 4.6 | 37 | G1 1/2 | 730 | 76 | 1240*1030*1435 |
| BK45-8G | 8 | 7.1 | 45 | G1 1/2 | 800 | 78 | 1480*1030*1345 |
| BK45-10 | 10 | 6.5 | 45 | G1 1/2 | 820 | 78 | 1240*1030*1595 |
| BK45-13 | 13 | 5.6 | 45 | G1 1/2 | 820 | 78 | 1240*1030*1595 |
| BK55-8G | 8 | 10 | 55 | G1 1/2 | 800 | 80 | 1480*1030*1345 |
| BK55-10 | 10 | 8.5 | 55 | G1 1/2 | 1200 | 80 | 1545*1200*1470 |
| BK55-13 | 13 | 7.4 | 55 | G1 1/2 | 1200 | 80 | 1545*1200*1470 |
Detailed Photos
Built-in oil separation system The built-in oil separation design ensures the separation of oil and gas and reduces fuel consumption.
Certified Genuine Parts. CHINAMFG Certified Genuine Parts to ensure the compressors delivered to you always perform at high performance.
Adhering to the basic belief in environmental sustainability, we have been committed to continuously improving the energy efficiency of our products and creating value for users.
Energy saving and economical, reliable and durable, environmentally friendly and quiet.
The Latest-Generation High Efficiency Screw Rotor! “Large Rotor, Low Speed”, Direct Drive
The latest generation of high-efficiency rotor profiles, full-spectrum screw mainframe meets the national energy-saving standards.
Application
Electric power, petroleum, auto repair, laser equipment, metallurgy, biopharmaceutical, printing, garment industry
Company Profile
FAQ
1.How do your prices compare to the manufacturer/factory?
We are the main distributor of major construction machinery manufacturers/factories in China and keep getting the best dealer prices. From the comparison and feedback from many customers, our price is even more competitive than the factory/factory price.
2.How is the delivery time?
In general, we can deliver ordinary machines immediately to our customers within 7 days, as we have various resources to inspect stock machines, locally and nationwide, and receive machines in a timely manner. But it takes more than 30 days for a manufacturer/factory to produce an order machine.
3.How often can you respond to customer inquiries?
Our team is made up of a group of hardworking and dynamic people who work around the clock to respond to customer inquiries and questions. Most issues can be successfully resolved within 8 hours, while manufacturers/factories take longer to respond.
4.Which payment methods can you accept?
Usually we can use wire transfer or letter of credit, and sometimes DP. (1) Wire transfer, 30% deposit in advance, 70% balance paid before shipment, long-term cooperation customers can present a copy of the original bill of lading. (2) Letter of credit, 100% irrevocable letter of credit without “soft terms” from internationally recognized banks can be accepted. Please seek advice from the sales manager you work with.
5.Which clauses in the Incoterms 2571 can you use?
We are a professional and mature international player and can handle all INCOTERMS 2571, we usually work on regular terms like FOB, CFR, CIF, CIP, DAP.
6.How long are your prices valid?
We are a gentle and friendly supplier, never greedy for profit. Our prices remain largely stable throughout the year. We will only adjust the price according to the following 2 situations: (1) USD exchange rate: According to the international currency exchange rate, the RMB exchange rate is quite different; (2) The manufacturer/factory adjusted the machine price due to the increase of labor cost or raw material cost.
7.What logistics methods can you use for shipping?
We can transport construction machinery with various means of transport. (1) 80% of our shipping will be by the sea, to all major continents such as Africa, South America, Middle East. (2) China’s inland neighboring countries, such as Russia, Mongolia, Kazakhstan, Kyrgyzstan, Tajikistan, Uzbekistan, Turkmenistan, etc., can transport by road or rail. (3) For urgently needed light spare parts, we can provide international express services, such as DHL, TNT, UPS, FedEx, etc.
| After-sales Service: | Warranty Service |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Samples: |
US$ 7100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
.webp)
What are the advantages of using rotary vane compressors?
Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:
1. Compact and Lightweight:
Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.
2. High Efficiency:
Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.
3. Quiet Operation:
Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.
4. Oil Lubrication:
Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.
5. Versatile Applications:
Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.
6. Easy Maintenance:
Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.
These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.
.webp)
How do you choose the right air compressor for woodworking?
Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:
1. Required Air Volume (CFM):
Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.
2. Tank Size:
Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.
3. Maximum Pressure (PSI):
Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.
4. Noise Level:
Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.
5. Portability:
Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.
6. Power Source:
Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.
7. Quality and Reliability:
Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.
8. Budget:
Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.
By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.
.webp)
How do oil-lubricated and oil-free air compressors differ?
Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:
Oil-Lubricated Air Compressors:
1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.
2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.
3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.
4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.
Oil-Free Air Compressors:
1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.
2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.
3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.
4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.
When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.
editor by CX 2023-10-31
China Standard Screw Air Compressor Rj15A-420A Automatic Car Wash Air Compressor for Vehicle Repair Shop with Good quality
Product Description
Screw Air Compressor RJ15A-420A Automatic Car Wash Air Compressor For Vehicle Repair Shop
Main Features:
1. The flexible belt will be automatically tensioned in use. Through adjusting the tension, minimize the loss of pressure and power, to enhance the efficiency of compression.
2. Using the precise spin-oil separator and special two-pole buffer separation, it can minimize the oil consumption, guarantee the outlet gas purity, and extend the lifetime of filter elements.
3. With the toothed V-belt, it has good heat dissipation, long life, higher gear drive and transmission efficiency, as high as over 98%.
Oil Filter: Good Quality filters ensure longer working life and save the maintenance time and cost.
Stainless Steel Hoses: High and low temperature resistant, high pressure resistant.
Compressed Air Vessel: Reduction of pressure drops and energy costs, quality air with low oil content.
Air End: Imported DLOL air end, advanced profile design.
Electric Motor: Premium efficiency Totally TEFC IP54/IP55 motor (Class F insulation) protects against dust and chemicals etc.
Air Filter: Two-stage dust removal and filtering system with efficiency of up to 99.9% even in heavy-duty environment.
Cooler: High quality aluminum material, alternating expression cooler fins, ensure the perfect radiating effect.
Technical parameters:
Our workshop:
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Customization: |
Available
|
|
|---|
.webp)
How are air compressors employed in the petrochemical industry?
Air compressors play a vital role in the petrochemical industry, where they are employed for various applications that require compressed air. The petrochemical industry encompasses the production of chemicals and products derived from petroleum and natural gas. Here’s an overview of how air compressors are utilized in the petrochemical industry:
1. Instrumentation and Control Systems:
Air compressors are used to power pneumatic instrumentation and control systems in petrochemical plants. These systems rely on compressed air to operate control valves, actuators, and other pneumatic devices that regulate processes such as flow control, pressure control, and temperature control. Compressed air provides a reliable and clean source of energy for these critical control mechanisms.
2. Pneumatic Tools and Equipment:
Petrochemical plants often utilize pneumatic tools and equipment for various tasks such as maintenance, repair, and construction activities. Air compressors supply the necessary compressed air to power these tools, including pneumatic drills, impact wrenches, grinders, sanders, and painting equipment. The versatility and convenience of compressed air make it an ideal energy source for a wide range of pneumatic tools used in the industry.
3. Process Air and Gas Supply:
Petrochemical processes often require a supply of compressed air and gases for specific applications. Air compressors are employed to generate compressed air for processes such as oxidation, combustion, and aeration. They may also be used to compress gases like nitrogen, hydrogen, and oxygen, which are utilized in various petrochemical reactions and treatment processes.
4. Cooling and Ventilation:
Petrochemical plants require adequate cooling and ventilation systems to maintain optimal operating conditions and ensure the safety of personnel. Air compressors are used to power cooling fans, blowers, and air circulation systems that help maintain the desired temperature, remove heat generated by equipment, and provide ventilation in critical areas.
5. Nitrogen Generation:
Nitrogen is widely used in the petrochemical industry for applications such as blanketing, purging, and inerting. Air compressors are utilized in nitrogen generation systems, where they compress atmospheric air, which is then passed through a nitrogen separation process to produce high-purity nitrogen gas. This nitrogen is used for various purposes, including preventing the formation of explosive mixtures, protecting sensitive equipment, and maintaining the integrity of stored products.
6. Instrument Air:
Instrument air is essential for operating pneumatic instruments, analyzers, and control devices throughout the petrochemical plant. Air compressors supply compressed air that is treated and conditioned to meet the stringent requirements of instrument air quality standards. Instrument air is used for tasks such as pneumatic conveying, pneumatic actuators, and calibration of instruments.
By employing air compressors in the petrochemical industry, operators can ensure reliable and efficient operation of pneumatic systems, power various tools and equipment, support critical processes, and maintain safe and controlled environments.
How do you choose the right air compressor for woodworking?
Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:
1. Required Air Volume (CFM):
Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.
2. Tank Size:
Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.
3. Maximum Pressure (PSI):
Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.
4. Noise Level:
Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.
5. Portability:
Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.
6. Power Source:
Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.
7. Quality and Reliability:
Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.
8. Budget:
Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.
By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.
.webp)
What are the key components of an air compressor system?
An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:
1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.
2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.
3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.
4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.
5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.
6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.
7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.
8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.
9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.
10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.
These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.
editor by CX 2023-10-30
China best Hot Sale 5.5HP 100L Portable Piston Belt Driven Air Compressor air compressor repair near me
Product Description
Product Description
About company:
HangZhou Shangyang Trading Co., Ltd. is a foreign trade technology enterprise focusing on providing air compressor products. The company has obvious advantages in the whole industry in terms of technical strength, business communication ability and quality control.
The company’s products mainly include air compressor, welding machine, cleaning machine, water pump, motor, etc., sold to more than 80 countries and regions around the world; And long-term for Europe, North and South America and other CHINAMFG brands and end sellers to provide high-quality air compressor products; The cooperation with these customers enables the company’s products to meet the technical and quality requirements of the mainstream markets in Europe and America.
Main Features:
1.Heavy cast iron body: heavy load, long stroke, low fuel consumption, low noise
2.Cylinder: made of high-grade cast iron, strength, good lubricity, wall by the fine honing, wear-resistant, durable
3.Piston ring: good elasticity, excellent wear resistance, low oil consumption, not easy to make the valve group carbon deposition and loss of oil to burn the crankshaft and connecting rod.
4.The crankshaft, connecting rod, piston: well balanced, wear resistance, high strength, smooth running balance.
5.Pressure cast iron pump, can be adapted to use large horsepower;
6.Customers could choose different type of compressor pump with different size of air tank or different motor power
Services:
| before sales | 1.24 hours online service . 2.Any inquiries will be replied within 12 hours. 3.Offer professional machine details and information. 4.Technology knowledge share . |
| on sale |
1.Protect the client payment security . more better. |
| after sales |
1.Fast delivery and test and adjust machine working well before delivery. |
| After-sales Service: | Overseas Third-Party Support Available |
|---|---|
| Warranty: | 0ne Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Cylinder Arrangement: | Duplex Arrangement |
| Cylinder Position: | Vertical |
.webp)
Can air compressors be used for cleaning and blowing dust?
Yes, air compressors can be effectively used for cleaning and blowing dust in various applications. Here’s how air compressors are utilized for these purposes:
1. Cleaning Machinery and Equipment:
Air compressors are commonly used for cleaning machinery and equipment in industries such as manufacturing, automotive, and construction. Compressed air is directed through a nozzle or blowgun attachment to blow away dust, debris, and other contaminants from surfaces, crevices, and hard-to-reach areas. The high-pressure air effectively dislodges and removes accumulated dust, helping to maintain equipment performance and cleanliness.
2. Dusting Surfaces:
Air compressors are also employed for dusting surfaces in various settings, including homes, offices, and workshops. The compressed air can be used to blow dust off furniture, shelves, electronic equipment, and other objects. It provides a quick and efficient method of dusting, especially for intricate or delicate items where traditional dusting methods may be challenging.
3. Cleaning HVAC Systems:
Air compressors are utilized for cleaning HVAC (Heating, Ventilation, and Air Conditioning) systems. The compressed air can be used to blow dust, dirt, and debris from air ducts, vents, and cooling coils. This helps improve the efficiency and air quality of HVAC systems, preventing the buildup of contaminants that can affect indoor air quality.
4. Blowing Dust in Workshops:
In workshops and garages, air compressors are often used to blow dust and debris from workbenches, power tools, and work areas. Compressed air is directed to blow away loose particles and maintain a clean and safe work environment. This is particularly useful in woodworking, metalworking, and other trades where dust and debris can accumulate during the manufacturing or fabrication processes.
5. Cleaning Electronics and Computer Equipment:
Air compressors are employed for cleaning electronics and computer equipment. The compressed air is used to blow dust and debris from keyboards, computer cases, circuit boards, and other electronic components. It helps in preventing overheating and maintaining the proper functioning of sensitive electronic devices.
6. Industrial Cleaning Applications:
Air compressors find extensive use in industrial cleaning applications. They are employed in industrial settings, such as factories and warehouses, for cleaning large surfaces, production lines, and equipment. Compressed air is directed through specialized cleaning attachments or air-operated cleaning systems to remove dust, dirt, and contaminants efficiently.
When using air compressors for cleaning and blowing dust, it is important to follow safety precautions and guidelines. The high-pressure air can cause injury if directed towards the body or sensitive equipment. It is advisable to wear appropriate personal protective equipment, such as safety glasses and gloves, and ensure that the air pressure is regulated to prevent excessive force.
Overall, air compressors provide a versatile and effective solution for cleaning and blowing dust in various applications, offering a convenient alternative to traditional cleaning methods.
.webp)
What are the environmental considerations when using air compressors?
When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:
Energy Efficiency:
Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.
Air Leakage:
Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.
Noise Pollution:
Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.
Emissions:
While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.
Proper Waste Management:
Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.
Sustainable Practices:
Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.
By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.
.webp)
What are the safety considerations when operating an air compressor?
Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:
1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.
2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.
3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.
4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.
5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.
6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.
7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.
8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.
9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.
10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.
By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.
editor by CX 2023-10-27
China Professional 5HP Piston Type Silent Oil Free Air Compressors (DA7005) air compressor for car
Product Description
5HP Piston Type Silent Oil Free Air Compressors (DA7005)
Description:
Model: DA7005
Voltage: 100-240V/50-60Hz
Power: 3750W [5HP]
Max Air Flow: 760L/min [26.84CFM]
Air Flow@7bar: 250L/min[8.83CFM]
Noise Level: ≤ 70 dB (A)
Max. Pressure: 8bar [116PSI]
Max Current: 17A
Air Tank: 140L [30.8Gallon]
Gross Weight: 148kg [326.3lbs]
Net Weight: 110kg [242.5lbs]
Dimension: 1430*460*730mm [56.3*18.1*28.7 inch]
Specifications
1> Piston type;
2> Silent, Oil Free;
3> Used for DENTAL, MEDICAL
4> 5HP, 140L tank;
5> Work for 10PCS dental units
Options
Air Dryer System (ensure dryer air flow for your equipment)
Metal Silent Cabinet ( all operation key located outside of the cabinet, easy to use; Temperature sensor and cooling system, keep longer service life for the motor; With casters, you may move the compressor freely )
Characteristics:
1. Oil free: Do not need any lubricated oil, and harmless to the human body.
2. Super silent: Noise level lower than 56dB(a) to reduce noise pollution.
3. Multi-phase filteration: Advanced multi-phase filtration to ensure extremely clean air, and lengthen service life.
4. Safety using: Air compressor motors equipped with thermal prevention device to avoid overheating and protect motors.
5. Clean tank: All air receiver tanks have internal epoxy coating applied to avoid corrosion.
6. Automatic adjustment: High quality pressure switch used to control the power of air compressor automatically by adjustment of pressure level.
7. Pressure adjustment: Working pressure could be adjusted to meet the demand of different supporting equipments.
8. High durability: Serviceable time exceeds 15, 000 hours.
9. Simple operation: Using directly when connecting with power.
10. Easy maintanance: No need any lubricated oil.
11. Warranty: 2 years.
Applications:
Medical; Laboratory; Pharmacy; Food Fermentation; Life Science; Biotechnology;
Analytical Instrument; Measuring Apparatus; Water Processing Environmental Monitoring;
Automation; Coating Surface Processing; Makeup; Garments Manufacture; Shoemaking;
Petro Chemistry; Arts, crafts and hobby; Beauty And Body; Printing; Optical And Photo;
Research And Laboratory; Jewelry And Accessories; Electronic And Computers; Safety
System;
All Dynamic products are qualified by series certifications to ensure high quality, please be assured the purchase.
1. As the qualified manufacturer of medical equipments in China, we owned the certifications as following:
1.1 Industry Production License issued by Chinese Government.
1.2 Medical Device Manufacturing Enterprise License issued by State Food and Drug Administration
1.3 Medical Device Product Registration Certificate issued by State Food and Drug Administration
2. To meet the demand of high quality products and services from European and American markets, we owned the certifications as following:
2.1 German TUV ISO9001-2008 Quality Management System
2.2 German TUV ISO13485-2012 Medical Device Product Quality Management System
2.3 German TUV Medical CE Certification
2.4 German TUV Industrial CE Certification
2.5 America FDA Approved
Contact Us For Quote Now!
Add: NO108 Xingpu Road, Lujia Town, HangZhou City, ZheJiang Province, China
.
| Model | DA7001 | DA7002 | DA7003 | DA7004 | DA7005 | |
| Voltage/Hz | V | 100-240 | 100-240 | 100-240 | 100-240 | 100-240 |
| Hz | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | |
| Power | HP | 1 | 2 | 3 | 4 | 5 |
| KW | 0.75 | 1.5 | 2.25 | 3 | 3.75 | |
| Max Air Flow | L/min | 152 | 304 | 456 | 608 | 760 |
| CFM | 5.37 | 10.74 | 16.10 | 21.47 | 26.84 | |
| Air Flow @7bar | L/min | 50 | 100 | 150 | 200 | 250 |
| CFM | 1.77 | 3.53 | 5.3 | 7.06 | 8.83 | |
| Max. Pressure | Bar | 8 | 8 | 8 | 8 | 8 |
| psi | 116 | 116 | 116 | 116 | 116 | |
| Tank | L | 30 | 50 | 70 | 100 | 140 |
| Gallon | 6.6 | 11.0 | 15.4 | 22.0 | 30.8 | |
| Net Weight | Kg | 29.5 | 50 | 78 | 95 | 110 |
| Lbs | 65.0 | 110.2 | 172 | 209.4 | 242.5 | |
| Gross Weight | Kg | 33 | 62.5 | 90 | 114.5 | 148 |
| Lbs | 72.8 | 137.8 | 198.4 | 252.4 | 326.3 | |
| Noise Level | dB(A) | ≤70 | ≤70 | ≤70 | ≤70 | ≤70 |
| Max current | A | 3.4 | 6.8 | 10.2 | 13.6 | 17 |
| Dimensions | mm | 410×410×650 | 710×425×730 | 920×425×725 | 1070×460×750 | 1430×460×730 |
| inch | 16.1×16.1×25.6 | 28×16.7×28.7 | 36.2×16.7×28.5 | 42.1×18.1×29.5 | 56.3×18.1×28.7 | |
| Lubrication Style: | Oil-free |
|---|---|
| Cooling System: | Air Cooling |
| Cylinder Arrangement: | Parallel Arrangement |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
| Compress Level: | Single-Stage |
| Customization: |
Available
|
|
|---|
.webp)
Can air compressors be used for gas compression and storage?
Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:
Gas Compression:
Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.
Gas Storage:
Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.
Gas Types:
While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:
- Nitrogen
- Oxygen
- Hydrogen
- Carbon dioxide
- Natural gas
- Refrigerant gases
It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.
By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.
.webp)
How do you maintain proper air quality in compressed air systems?
Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:
1. Air Filtration:
Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.
2. Moisture Control:
Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.
3. Oil Removal:
If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.
4. Regular Maintenance:
Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.
5. Air Receiver Tank Maintenance:
Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.
6. Air Quality Testing:
Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.
7. Education and Training:
Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.
8. Documentation and Record-Keeping:
Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.
By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.
What are the safety considerations when operating an air compressor?
Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:
1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.
2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.
3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.
4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.
5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.
6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.
7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.
8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.
9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.
10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.
By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.
editor by CX 2023-10-27
China best Shang Air 4.0 MPa Piston Air Compressor 35vz Series 40bar Air Compressor air compressor price
Product Description
Piston air compressor
A piston type air compressor is a type of reciprocating air compressor, whose compression component is a piston, which reciprocates inside the cylinder and moves with the same gas as the piston. Derivative products include air compressors, assembly line equipment, plastic machines, fans,etc.
Basic composition of piston air compressor:
1. Exhaust valve 2. Cylinder 3. Piston 4. Piston rod 5. Slider 6. Connecting rod 7. Crane 8. Suction valve 9. Valve spring
operational principle
When the reciprocating piston in the cylinder moves to the right, the pressure in the left chamber of the piston in the cylinder is lower than atmospheric pressure pa, the suction valve opens, and external air is sucked into the cylinder. This process is called compression. When the pressure in the cylinder is higher than the pressure p in the output air pipeline, the exhaust valve opens. The process of compressed air being sent into the gas pipeline is called the exhaust process. The reciprocating motion of the piston is formed by a crank slider mechanism driven by an electric motor. The rotational motion of the crank is converted into sliding – the reciprocating motion of the piston.
35VZ(Vertical double machine) Series:
Air discharge :4.0~8.0Nm3/min
Discharge pressure:4.0Mpa
installed capacity:25HP(18.5KW)~25HP×2 (18.5KW×2)
| Series | Model | Air discharge (Nm3/min) | Discharge pressure(Mpa) | Motor Power(kw) | Weight (kg) |
Size length×width×height(mm) |
| 35VZ | 35VZ-4.00/10/40 | 4.0 | 4.0 | 18.5 | 550 | 1600*800*1200
2200*1000*2050 |
| 2I-35VZ-8.00/10/40 | 8.0 | 4.0 | 18.5×2 | 1400 |
Packaging & Shipping
Certifications
Company Profile
FAQ
Q1: How many coutries you already exported?
A: Exported to more than 50 countries mainly from America,Russia,Brazil,Bangladesh,Egypt,Kuwait,Turkey,Jordan,Dubai,Iran,Peru,India,Malaysia,Vietnam,Indonesia,Singapore etc.
Q2: Is it OK to print my logo on products ?
A: Yes , OEM and ODM are available for us.
Q3: How could you guarantee your products ?
A: Each piece of products is manufactured by certified workshops, inspected by piece according to national QA/QC standard. We also could issue the warranty to customer to guarantee the quality.
Q4: Can we visit your factory before order?
A: Sure, we warmly welcome you to visit our factory at any time. The more you know us, the more you trust us! So you can rest assured on our quality products and our best services.
Q5: Will you delivery the goods on time?
A: Yes,we promise to deliver on time,indemnity clause in contact.
| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Oil-less |
| Cooling System: | Water Cooling |
| Cylinder Arrangement: | Balanced Opposed Arrangement |
| Cylinder Position: | Vertical |
| Customization: |
Available
|
|
|---|
.webp)
What is the impact of humidity on compressed air quality?
Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:
1. Corrosion:
High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.
2. Contaminant Carryover:
Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.
3. Decreased Efficiency of Pneumatic Systems:
Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.
4. Product Contamination:
In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.
5. Increased Maintenance Requirements:
Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.
6. Adverse Effects on Instrumentation:
Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.
To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.
What is the energy efficiency of modern air compressors?
The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:
Variable Speed Drive (VSD) Technology:
Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.
Air Leakage Reduction:
Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.
Efficient Motor Design:
The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.
Optimized Control Systems:
Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.
Air Storage and Distribution:
Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.
Energy Management and Monitoring:
Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.
It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.
Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.
Can air compressors be used for automotive applications?
Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:
1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.
2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.
3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.
4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.
5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.
6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.
7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.
When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.
Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.
editor by CX 2023-10-27